Achieving strength-ductility synergy of an additively manufactured metastable high-entropy alloy via deep cryogenic treatment followed by laser shock peening
International Journal of Extreme Manufacturing · 01.02.2026 · 8 (1) · 015006
DOI: 10.1088/2631-7990/ae09df ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Extreme Manufacturing, online erschienen am 09.10.2025. Verfasst von Zhaopeng Tong und 6 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Planning Project of Zhenjiang-International Scientific and Technological Cooperation, Youth Science Foundation of Jiangsu Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Laser powder bed fusion (LPBF) is an attractive additive manufacturing technology for preparing high-performance high-entropy alloys (HEAs) engineering components. Unfortunately, the existence of inherent thermal residual stress and non-equilibrium microstructures in the additively manufactured components results in unsatisfactory mechanical properties. Herein, we propose a novel strengthening strategy, namely deep cryogenic treatment (DCT) followed by laser shock peening (LSP), to tailor the microstructures and enhance performances of an LPBF additively manufactured metastable HEA. The post-treatment effects of DCT + LSP on the LPBF-fabricated Fe 50 Mn 30 Co 10 Cr 10 HEA are evaluated in terms of microstructural modifications, residual stress, and microhardness redistribution, as well as tensile properties. Results indicate that a gradient heterogeneous structure is formed on the as-built sample surface, featuring gradient variations in grain size, martensitic phase content, and dislocation density, due to the grain refinement and martensitic phase transformation under DCT + LSP. The initial tensile residual stress on the surface is fully transformed into compressive stress, achieving a peak of −289 MPa, and the surface microhardness attains a maximum of 380.8 HV. The various strengthening mechanisms of gradient heterogeneous structures, as well as the multiple effects of heterodeformation-induced (HDI) hardening, transformation-induced plasticity (TRIP), and twinning-induced plasticity (TWIP), are responsible for achieving strength-ductility synergy. This work provides a practical pathway and valuable scientific insights for enhancing the mechanical behaviors of additively manufactured metastable HEAs via microstructural engineering.
Förderung
- Science and Technology Planning Project of Zhenjiang-International Scientific and Technological Cooperation
- Youth Science Foundation of Jiangsu Province
- National Natural Science Foundation of China
Zitieren
APA
Tong, Z., Zhang, Y., Wang, Y., Ye, Y., Yin, J., Bao, Y., & Ren, X. (2026). Achieving strength-ductility synergy of an additively manufactured metastable high-entropy alloy via deep cryogenic treatment followed by laser shock peening. International Journal of Extreme Manufacturing, 8(1), 015006. https://doi.org/10.1088/2631-7990/ae09df
Vancouver
Tong Z, Zhang Y, Wang Y, Ye Y, Yin J, Bao Y, et al. Achieving strength-ductility synergy of an additively manufactured metastable high-entropy alloy via deep cryogenic treatment followed by laser shock peening. International Journal of Extreme Manufacturing. 2026;8(1):015006. doi:10.1088/2631-7990/ae09df
BibTeX
@article{Tong2026,
author = {Tong, Zhaopeng and Zhang, Yuze and Wang, Yichen and Ye, YunXia and Yin, Jie and Bao, Yucheng and Ren, Xudong},
title = {Achieving strength-ductility synergy of an additively manufactured metastable high-entropy alloy via deep cryogenic treatment followed by laser shock peening},
journal = {International Journal of Extreme Manufacturing},
year = {2026},
volume = {8},
number = {1},
pages = {015006},
doi = {10.1088/2631-7990/ae09df}
}
EUVIMED