EUVIMEDEUVIMED entdecken
Crossref

Pore development and electrochemical performance of CO 2 -activated polyacrylonitrile-derived carbon nanofibers enabled by shellac

Min-Seo Kim, Beom-Gon Cho

Functional Composites and Structures · 01.12.2026 · 8 (4) · 045005

DOI: 10.1088/2631-6331/aeb69a ↗

Kurz gefasst

Fachartikel in der Zeitschrift Functional Composites and Structures, online erschienen am 09.11.2026. Verfasst von Min-Seo Kim und 1 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Gefördert von: Korea Technology and Information Promotion Agency for SMEs, Korea Evaluation Institute of Industrial Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyacrylonitrile (PAN)-derived carbon nanofibers (CNFs) were fabricated by incorporating shellac, a naturally derived polymer, into PAN precursor solutions, followed by stabilization, carbonization, and CO 2 activation. The resulting shellac/PAN-derived CNFs were characterized for their morphology, pore structure, surface chemistry, and electrochemical performance using a three-electrode configuration. The Brunauer–Emmett–Teller (BET) specific surface area increased markedly with increasing shellac content, from 214.1 m 2 g −1 for the shellac-free activated CNFs to 771.9 and 1059.8 m 2 g −1 for the samples containing 10 and 20 wt.% shellac, respectively. A corresponding increase in total pore volume was also observed. Despite their lower specific surface area, the shellac-free activated CNFs exhibited the highest specific capacitance of 186.5 F g −1 and the highest energy density of 24.6 Wh kg −1 at a current density of 0.5 A g −1 . These results suggest that a substantial fraction of the surface area generated in the shellac-containing samples was not effectively utilized for charge storage. Nevertheless, the sample containing 20 wt.% shellac exhibited a power density comparable to that of the shellac-free sample and retained 97.7% of the initial capacitance after 1000 charge–discharge cycles. These findings demonstrate that shellac effectively promotes the development of micro- and mesopores in PAN-derived CNFs. However, the electrochemical performance of the resulting electrodes is governed by the combined effects of ion-accessible pore structure, surface chemistry, and interfacial characteristics rather than solely by the total BET specific surface area alone.

Förderung

  • Korea Technology and Information Promotion Agency for SMEs
  • Korea Evaluation Institute of Industrial Technology

Zitieren

APA

Kim, M., & Cho, B. (2026). Pore development and electrochemical performance of CO 2 -activated polyacrylonitrile-derived carbon nanofibers enabled by shellac. Functional Composites and Structures, 8(4), 045005. https://doi.org/10.1088/2631-6331/aeb69a

Vancouver

Kim M, Cho B. Pore development and electrochemical performance of CO 2 -activated polyacrylonitrile-derived carbon nanofibers enabled by shellac. Functional Composites and Structures. 2026;8(4):045005. doi:10.1088/2631-6331/aeb69a

BibTeX
@article{Kim2026,
  author = {Kim, Min-Seo and Cho, Beom-Gon},
  title = {Pore development and electrochemical performance of CO 2 -activated polyacrylonitrile-derived carbon nanofibers enabled by shellac},
  journal = {Functional Composites and Structures},
  year = {2026},
  volume = {8},
  number = {4},
  pages = {045005},
  doi = {10.1088/2631-6331/aeb69a}
}
Kostenlos starten →