EUVIMEDEUVIMED entdecken
Crossref

Fabrication and characterization of promising properties of PEO/PMMA/P(VDF–HFP)–ZnO multifunctional polymer nanocomposites for advances in diverse flexible device technologies

Narottam Dev Rachhoya, Shiv K Barbar, R J Sengwa

Functional Composites and Structures · 01.12.2026 · 8 (4) · 045006

DOI: 10.1088/2631-6331/aeb4ff ↗

Kurz gefasst

Fachartikel in der Zeitschrift Functional Composites and Structures, online erschienen am 10.11.2026. Verfasst von Narottam Dev Rachhoya und 2 weiteren Autor:innen. Die Arbeit nennt 81 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Towards advances in flexible and lightweight multipurpose portable device technologies, ZnO nanoparticle-dispersed polymer-host-matrix-based nanocomposites with optimum properties have emerged as a promising class of multifunctional materials. In this context, innovative polymer nanocomposite (PNC) films have been rationally designed through a state-of-the-art solution cast procedure. A ternary polymer blend host matrix composed of poly(ethylene oxide) (PEO), poly(methyl methacrylate) (PMMA), and poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF–HFP)), in an equal-weight compositional ratio, was fabricated, with ZnO nanomaterials dispersed at varying x wt% concentrations ( x = 0, 3, 6, and 9) relative to the total weight of the matrix-based PNCs, denoted as PEO/PMMA/P(VDF–HFP)– x wt% ZnO. Comprehensive analysis of x-ray diffraction traces, Fourier transform infrared spectra, field emission scanning electron microscopy micro-images, and differential scanning calorimetry thermograms inferred that polymer crystalline phases, surface morphology, polymer–polymer interactions, polymer-nanoparticle interfaces, and thermal transition of PEO crystallines and their degree of crystallinity in these PNCs are significantly affected by the photosensing and piezoelectric ZnO concentrations. Ultraviolet–visible spectrophotometric absorbance analysis established these PNCs as wide-bandgap semiconductors (approximately 3 eV), which exhibit photosensitivity and high UV shielding resistance, demonstrating their importance in cutting-edge optoelectronics, piezo-phototronics, and a variety of smart sensing devices. Broadband dielectric spectroscopic analysis (20 Hz–1 GHz) revealed that the relative dielectric permittivity of these PNCs at 25 ˚C can be tuned from 9.1 to 2.5 synergistically with the variation of applied field frequency and ZnO nanofiller concentration. Microstructure interfaces and interactions considerably contributed to the enhanced permittivity of these materials, which are characterized as low dielectric loss materials of multiple structural relaxation processes. The credible range of dielectric properties and electrical conductivity of these PNCs suggests their potential uses as innovative nanodielectrics for capacitive-type energy storage and piezotronic-effect-based energy harvester devices, flexible dielectric substrates and insulators for cutting-edge microelectronics, as well as biomedical and self-powered wearable technologies.

Zitieren

APA

Rachhoya, N. D., Barbar, S. K., & Sengwa, R. J. (2026). Fabrication and characterization of promising properties of PEO/PMMA/P(VDF–HFP)–ZnO multifunctional polymer nanocomposites for advances in diverse flexible device technologies. Functional Composites and Structures, 8(4), 045006. https://doi.org/10.1088/2631-6331/aeb4ff

Vancouver

Rachhoya ND, Barbar SK, Sengwa RJ. Fabrication and characterization of promising properties of PEO/PMMA/P(VDF–HFP)–ZnO multifunctional polymer nanocomposites for advances in diverse flexible device technologies. Functional Composites and Structures. 2026;8(4):045006. doi:10.1088/2631-6331/aeb4ff

BibTeX
@article{Rachhoya2026,
  author = {Rachhoya, Narottam Dev and Barbar, Shiv K and Sengwa, R J},
  title = {Fabrication and characterization of promising properties of PEO/PMMA/P(VDF–HFP)–ZnO multifunctional polymer nanocomposites for advances in diverse flexible device technologies},
  journal = {Functional Composites and Structures},
  year = {2026},
  volume = {8},
  number = {4},
  pages = {045006},
  doi = {10.1088/2631-6331/aeb4ff}
}
Kostenlos starten →