EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Processing-dependent control of hole extraction in PbS quantum dot solar cells using PEDOT:PSS interlayers

Gyusang Yi, Katharina E Dehm, Kirill K Gubanov, Rainer H Fink, Ryan W Crisp

Journal of Physics: Energy · 09.11.2026

DOI: 10.1088/2515-7655/aebfc8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Physics: Energy, online erschienen am 09.11.2026. Verfasst von Gyusang Yi und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Bundesministerium für Forschung, Technologie und Raumfahrt, Deutsche Bundesstiftung Umwelt.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate evaluation of charge extraction remains a critical challenge in lead sulfide (PbS) quantum dot (QD) solar cells, where interfacial transport barriers can obscure intrinsic device performance. Here we show that the processing of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) hole transport layers introduces a transport barrier that is not visible in a current–voltage (J–V) measurement alone and is exposed only by cross-validating against external quantum efficiency (EQE). As-deposited interlayers inflate the J–V-derived short-circuit current density while suppressing the EQE response, with a deviation of more than 30% that leads to an overestimate of photocurrent generation. Intensity-dependent measurements confirm the mechanism directly: photocurrent collection in the as-deposited device is superlinear in illumination intensity, whereas the reference and annealed devices are linear. Thermal annealing at 90 °C removes the barrier, restores agreement between the two techniques and yields a short-circuit current density of 29.4 mA cm−2, approximately 82% of the detailed balance limit for the PbS bandgap. Atomic force microscopy and lateral conductivity measurements show that annealing densifies the interlayer, reducing its thickness by 17% and doubling its conductivity, and a controlled rehydration experiment shows that this change is not reversed by re-exposure to humid air. Photoelectron spectroscopy confirms the favorable valence band alignment that makes the interlayer useful. Beyond the performance gain, this work shows how processing-dependent interfacial transport governs both device operation and measurement fidelity, and provides practical guidelines for reliable characterization and interface design in high-current-density quantum dot photovoltaics.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Bundesministerium für Forschung, Technologie und Raumfahrt
  • Deutsche Bundesstiftung Umwelt

Zitieren

APA

Yi, G., Dehm, K. E., Gubanov, K. K., Fink, R. H., & Crisp, R. W. (2026). Processing-dependent control of hole extraction in PbS quantum dot solar cells using PEDOT:PSS interlayers. Journal of Physics: Energy. https://doi.org/10.1088/2515-7655/aebfc8

Vancouver

Yi G, Dehm KE, Gubanov KK, Fink RH, Crisp RW. Processing-dependent control of hole extraction in PbS quantum dot solar cells using PEDOT:PSS interlayers. Journal of Physics: Energy. 2026. doi:10.1088/2515-7655/aebfc8

BibTeX
@article{Yi2026,
  author = {Yi, Gyusang and Dehm, Katharina E and Gubanov, Kirill K and Fink, Rainer H and Crisp, Ryan W},
  title = {Processing-dependent control of hole extraction in PbS quantum dot solar cells using PEDOT:PSS interlayers},
  journal = {Journal of Physics: Energy},
  year = {2026},
  doi = {10.1088/2515-7655/aebfc8}
}
Kostenlos starten →