EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multidirectionally flexible thermoelectric device with conformable phase-change material heatsink for wearable cooling applications

Cuilei Li, Boyang Xiang, Lian Li, Edward S Fratto, Xuejun Lu, Jayant Kumar, Ramaswamyd Nagarajan, Zhiyong Gu

Flexible and Printed Electronics · 20.11.2026

DOI: 10.1088/2058-8585/aec4eb ↗

Kurz gefasst

Fachartikel in der Zeitschrift Flexible and Printed Electronics, online erschienen am 20.11.2026. Verfasst von Cuilei Li und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. ARMY and Combat Capabilities Development Command Soldier Center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wearable thermoelectric devices have gained increasing attention for their ability to provide localized temperature regulation through active cooling. Traditional thermoelectric devices (TEDs), often packaged with rigid ceramic components, face significant challenges in flexibility and adaptability for wearable applications. In this work, we present a highly flexible thermoelectric (TE) module enabled by an engineered copper electrode pattern, together with bismuth telluride–based thermoelectric pillars and an Ecoflex silicone rubber insulating matrix. The engineered electrode pattern enables bending up to approximately 180° in two orthogonal directions while maintaining electrical connectivity. To improve thermal management, a flexible heatsink incorporating aluminum nitride (AlN) and phase-change material (PCM) was integrated with the TE module to form a flexible TED. The integrated device achieved a maximum temperature difference of approximately 12.5 K between its hot and cold sides. Furthermore, a closed-loop proportional–integral–derivative (PID) control system was developed to regulate the cooling-side temperature of the TED. The effects of insulating layer thickness for TE module and different configurations of heatsink, including AlN loading and PCM, were systematically evaluated on cooling duration and temperature regulation under varying temperature conditions. Cooling cycling tests with exchangeable heatsinks further demonstrated repeated cooling operation while maintaining the desired temperature. The bending test was conducted for TE modules with a resistance change of only 2.4% after 1000 bending cycles, indicating good electrical durability. These results demonstrate the combined multidirectional flexibility, temperature-regulated cooling capabilities, and electrical durability of the TED, providing a practical approach toward wearable thermoelectric cooling management.

Förderung

  • U.S. ARMY and Combat Capabilities Development Command Soldier Center

Zitieren

APA

Li, C., Xiang, B., Li, L., Fratto, E. S., Lu, X., Kumar, J., Nagarajan, R., & Gu, Z. (2026). Multidirectionally flexible thermoelectric device with conformable phase-change material heatsink for wearable cooling applications. Flexible and Printed Electronics. https://doi.org/10.1088/2058-8585/aec4eb

Vancouver

Li C, Xiang B, Li L, Fratto ES, Lu X, Kumar J, et al. Multidirectionally flexible thermoelectric device with conformable phase-change material heatsink for wearable cooling applications. Flexible and Printed Electronics. 2026. doi:10.1088/2058-8585/aec4eb

BibTeX
@article{Li2026,
  author = {Li, Cuilei and Xiang, Boyang and Li, Lian and Fratto, Edward S and Lu, Xuejun and Kumar, Jayant and Nagarajan, Ramaswamyd and Gu, Zhiyong},
  title = {Multidirectionally flexible thermoelectric device with conformable phase-change material heatsink for wearable cooling applications},
  journal = {Flexible and Printed Electronics},
  year = {2026},
  doi = {10.1088/2058-8585/aec4eb}
}
Kostenlos starten →