Optimization of sputtered iridium oxide microelectrodes for long-term intracortical stimulation
Biomedical Physics & Engineering Express · 30.09.2025 · 11 (5) · 055034
DOI: 10.1088/2057-1976/adfdec ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomedical Physics & Engineering Express, online erschienen am 10.09.2025. Verfasst von Maarten Schelles und 5 weiteren Autor:innen. Beteiligte Einrichtung: Micro- and Nanosystems (MNS), Department of Electrical Engineering (ESAT), KU Leuven, Leuven, 3000, Belgium. Hauptthemen laut MEDLINE: Iridium, Electric Stimulation. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agentschap Innoveren en Ondernemen, Fonds voor Wetenschappelijk Onderzoek, KU Leuven.
Abstract (Originalsprache)
The combination of excellent stimulation properties and long-term stability of electrodes is key in the development of a clinical neural prosthesis for intracortical stimulation. Iridium oxide combines both characteristics, but its quality is highly dependent on the exact fabrication parameters. In this study, the fabrication of sputtered iridium oxide films (SIROFs) was investigated in terms of oxygen flow, sputtering power and sputtering time. By using electrochemical characterization techniques such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and pulsing experiments, we show that, between the investigated parameters, the best surface structure and electrochemical properties were obtained for a 5% oxygen flow, at 80 W and for 7 minutes of sputtering, resulting in a film thickness of 660 nm. The average impedance at 1 kHz of these electrodes was 4.8 kΩ and their maximal charge injection capacity (CIC) was 2.3 mC cm −2 , measured in vitro for a geometric surface area of 3200 μm 2 . The electrode impedance and CIC also remained stable during long-term (276 million pulses) and high-amplitude (135 thousand pulses) stimulation. Lastly, it was shown that the voltage transients remained stable over three months in vivo in a non-human primate with sufficiently low voltage levels required for clinically relevant stimulation currents. Together, the demonstrated electrochemical characteristics of the sputtered iridium oxide film combined with its robustness and long-term stability indicate that it is an excellent material for efficient and safe intracortical stimulation in chronic clinical applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Micro- and Nanosystems (MNS), Department of Electrical Engineering (ESAT), KU Leuven, Leuven, 3000, Belgium.
- ReVision Implant NV, Haasrode, 3053, Belgium.
- Laboratory for Neuro- and Psychophysiology, KU Leuven, Leuven 3000, Belgium.
- Leuven Brain Institute, KU Leuven, Leuven 3000, Belgium.
- Leuven Institute for Micro and Nanoscale Integration (LIMNI), Leuven, 3000, Belgium.
ORCID-Profile: Maarten Schelles, Laurens Goyvaerts, Lara Merken, Peter Janssen, Frederik Ceyssens, Michael Kraft
Förderung
- Agentschap Innoveren en Ondernemen
- Fonds voor Wetenschappelijk Onderzoek
- KU Leuven
- HORIZON EUROPE European Innovation Council
Zitieren
APA
Schelles, M., Goyvaerts, L., Merken, L., Janssen, P., Ceyssens, F., & Kraft, M. (2025). Optimization of sputtered iridium oxide microelectrodes for long-term intracortical stimulation. Biomedical Physics & Engineering Express, 11(5), 055034. https://doi.org/10.1088/2057-1976/adfdec
Vancouver
Schelles M, Goyvaerts L, Merken L, Janssen P, Ceyssens F, Kraft M. Optimization of sputtered iridium oxide microelectrodes for long-term intracortical stimulation. Biomedical Physics & Engineering Express. 2025;11(5):055034. doi:10.1088/2057-1976/adfdec
BibTeX
@article{Schelles2025,
author = {Schelles, Maarten and Goyvaerts, Laurens and Merken, Lara and Janssen, Peter and Ceyssens, Frederik and Kraft, Michael},
title = {Optimization of sputtered iridium oxide microelectrodes for long-term intracortical stimulation},
journal = {Biomedical Physics & Engineering Express},
year = {2025},
volume = {11},
number = {5},
pages = {055034},
doi = {10.1088/2057-1976/adfdec}
}
EUVIMED