Evaluation of microstructure and mechanical behavior of Ti p /AZ91 composites produced by hot press sintering
Materials Research Express · 13.11.2026 · 13 (21) · 216506
DOI: 10.1088/2053-1591/aebd4f ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Research Express, online erschienen am 10.11.2026. Verfasst von Fevzi Kelen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Van Yüzüncü Yıl University, Turkey, Scientific Research Projects Coordination Unit at Van Yüzüncü Yıl University.
Abstract (Originalsprache)
In the present study, the density, morphological characteristic and mechanical properties at both room and elevated temperatures of titanium microparticle-reinforced AZ91 matrix composites were evaluated. Density measurements of the specimens indicated a close agreement between the theoretical and experimental values. Porosity was determined to be below 1% in all specimens. Morphological analyses revealed that the titanium particles were located along the grain boundaries of the matrix alloy and exhibited a relatively uniform distribution. The field emission scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffraction analyses identified the presence of α -Mg, β -Mg 17 Al 12 , and Ti phases. No additional phases were detected beyond these. In this context, a pore-free microstructure devoid of secondary phases was obtained at the matrix–reinforcement interface. Compression tests revealed that both the yield and compressive strengths, as well as the ductility, were significantly improved compared to the monolithic alloy. At room temperature, the composites exhibited maximum values of 213.9 MPa for yield strength, 464.9 MPa for compressive strength, and 18.5% for ductility. These values show increases of approximately 18%, 90.5%, and 68%, respectively, compared to the monolithic alloy. Furthermore, a similar trend was observed at elevated temperatures, where the corresponding values remained significantly higher than those of the monolithic alloy. Due to their low density and superior mechanical properties at both room and elevated temperatures, composite specimens constitute a viable option for industrial applications, including the automotive sector.
Förderung
- Van Yüzüncü Yıl University, Turkey
- Scientific Research Projects Coordination Unit at Van Yüzüncü Yıl University
Zitieren
APA
Kelen, F. (2026). Evaluation of microstructure and mechanical behavior of Ti p /AZ91 composites produced by hot press sintering. Materials Research Express, 13(21), 216506. https://doi.org/10.1088/2053-1591/aebd4f
Vancouver
Kelen F. Evaluation of microstructure and mechanical behavior of Ti p /AZ91 composites produced by hot press sintering. Materials Research Express. 2026;13(21):216506. doi:10.1088/2053-1591/aebd4f
BibTeX
@article{Kelen2026,
author = {Kelen, Fevzi},
title = {Evaluation of microstructure and mechanical behavior of Ti p /AZ91 composites produced by hot press sintering},
journal = {Materials Research Express},
year = {2026},
volume = {13},
number = {21},
pages = {216506},
doi = {10.1088/2053-1591/aebd4f}
}
EUVIMED