Microstructural evolution and mechanical performance of gradient porous Ti–35Nb–7Zr–5Ta alloys prepared by powder metallurgy
Materials Research Express · 14.08.2026 · 13 (15) · 156506
DOI: 10.1088/2053-1591/ae912e ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Research Express, online erschienen am 10.08.2026. Verfasst von Li Chenwei und 2 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Provincial Natural Science Basic Research Plan.
Abstract (Originalsprache)
The elastic modulus mismatch between dense titanium alloys and natural bone remains a major challenge for orthopedic implant applications, as it may induce stress shielding and impair long-term implant stability. In this study, porous and gradient porous Ti–35Nb–7Zr–5Ta alloys were fabricated by powder metallurgy combined with an Mg–Zn pore-forming agent technique to improve the strength–modulus balance. The effects of sintering temperature and gradient architecture on microstructure, phase constitution, pore characteristics, mechanical properties, and deformation behavior were investigated. As the sintering temperature increased from 900 °C to 1100 °C, the porosity decreased from 25.5% to 15.2%, while the compressive strength increased from 426 to 689 MPa, indicating improved densification and interparticle bonding. X-ray diffraction analysis indicated that the specimens were mainly composed of the β -Ti phase, with enhanced elemental diffusion at higher sintering temperatures. By regulating the Mg–Zn content in different layers, three-layer axial gradient porous structures were constructed. Among the investigated gradient structures, the TD01015 specimen exhibited the best overall performance, with an elastic modulus of 28.73 GPa and a compressive strength of 746 MPa. COMSOL finite element simulations indicated that the gradient porous structure promoted progressive stress transfer and coordinated deformation, thereby reducing local stress concentration. These results suggest that gradient porous Ti–35Nb–7Zr–5Ta alloys prepared by powder metallurgy have potential for load-bearing bone implant applications.
Förderung
- Shaanxi Provincial Natural Science Basic Research Plan
Zitieren
APA
Chenwei, L., Xiaoyi, L., & Zheng, Z. (2026). Microstructural evolution and mechanical performance of gradient porous Ti–35Nb–7Zr–5Ta alloys prepared by powder metallurgy. Materials Research Express, 13(15), 156506. https://doi.org/10.1088/2053-1591/ae912e
Vancouver
Chenwei L, Xiaoyi L, Zheng Z. Microstructural evolution and mechanical performance of gradient porous Ti–35Nb–7Zr–5Ta alloys prepared by powder metallurgy. Materials Research Express. 2026;13(15):156506. doi:10.1088/2053-1591/ae912e
BibTeX
@article{Chenwei2026,
author = {Chenwei, Li and Xiaoyi, Li and Zheng, Zhang},
title = {Microstructural evolution and mechanical performance of gradient porous Ti–35Nb–7Zr–5Ta alloys prepared by powder metallurgy},
journal = {Materials Research Express},
year = {2026},
volume = {13},
number = {15},
pages = {156506},
doi = {10.1088/2053-1591/ae912e}
}
EUVIMED