Characterization of the mechanical and microstructural properties of cryogenic and austempering heat treatments on Mo alloyed ductile cast iron
Materials Research Express · 26.06.2026 · 13 (12) · 126503
DOI: 10.1088/2053-1591/ae79fa ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Research Express, online erschienen am 17.06.2026. Verfasst von Abdullah Sert. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Eskişehir Osmangazi Üniversitesi.
Abstract (Originalsprache)
This study examines the combined effects of molybdenum (Mo) alloying and deep cryogenic treatment (DCT) on the microstructure and mechanical response of austempered ductile iron (ADI). Ductile irons with three Mo contents (0.388, 0.671, and 0.990 wt.%) were produced, austempered at 400 °C, and subsequently subjected to DCT at −196 °C for 360 min. Microstructural and phase analyses were conducted using optical microscopy, scanning electron microscopy, high-resolution transmission electron microscopy, and x-ray diffraction (XRD). Austempering resulted in a typical ausferritic matrix, while the subsequent cryogenic step was associated with further microstructural refinement and features indicative of partial transformation of retained austenite. In addition, fine secondary features were observed locally and attributed to carbide-like precipitates. Quantitative XRD analysis revealed the presence of α and γ reflections in all heat-treated conditions. Detailed diffraction scans exhibited a distinct peak shift toward lower 2 θ angles following DCT, indicating an expansion of the lattice parameters and a corresponding enrichment of carbon within the austenite phase. In terms of mechanical response, the integration of austempering and DCT led to a 16.6% increase in hardness compared to the as-cast state. Furthermore, the combined heat treatment cycle resulted in a 42.3% enhancement in impact energy relative to the initial cast condition, highlighting the potential of DCT to optimize the structural integrity and toughness of Mo-alloyed ADI.
Förderung
- Eskişehir Osmangazi Üniversitesi
Zitieren
APA
Sert, A. (2026). Characterization of the mechanical and microstructural properties of cryogenic and austempering heat treatments on Mo alloyed ductile cast iron. Materials Research Express, 13(12), 126503. https://doi.org/10.1088/2053-1591/ae79fa
Vancouver
Sert A. Characterization of the mechanical and microstructural properties of cryogenic and austempering heat treatments on Mo alloyed ductile cast iron. Materials Research Express. 2026;13(12):126503. doi:10.1088/2053-1591/ae79fa
BibTeX
@article{Sert2026,
author = {Sert, Abdullah},
title = {Characterization of the mechanical and microstructural properties of cryogenic and austempering heat treatments on Mo alloyed ductile cast iron},
journal = {Materials Research Express},
year = {2026},
volume = {13},
number = {12},
pages = {126503},
doi = {10.1088/2053-1591/ae79fa}
}
EUVIMED