Thermo-mechanical coupling analysis and experimental study of IN718 and SS316L functionally graded materials fabricated by laser-directed energy deposition
Materials Research Express · 28.05.2026 · 13 (10) · 106506
DOI: 10.1088/2053-1591/ae6d83 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Research Express, online erschienen am 21.05.2026. Verfasst von Jialong Liu und 8 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Defense Pre-research Projects.
Abstract (Originalsprache)
In this study, laser directed energy deposition, using a fiber laser with a maximum output power of 6000 W, was employed to fabricate SS316L/IN718 functionally graded materials (FGMs) with three transition strategies: 25% FGM, 50% FGM, and direct transition (TD). By combining thermo-mechanical simulations with experimental investigations, the effects of different transition strategies on residual stress, microstructure, and mechanical properties were systematically evaluated. The results show that the TD sample exhibited high residual stress concentration at the heterogeneous material interface, which led to brittle fracture and the lowest tensile strength. Although the 25% FGM strategy alleviated residual stress to some extent, a low-melting eutectic phase formed in a specific compositional layer, inducing liquation cracking and consequently deteriorating the mechanical performance. In contrast, the 50% FGM strategy successfully avoided the crack-sensitive compositional range, significantly reduced residual stress, and minimized internal defects, thereby achieving the best overall performance, with an ultimate tensile strength of 542.2 MPa. Hardness measurements revealed that the hardness increased from 232 HV at the bottom to 265 HV at the top along the build direction, indicating enhanced surface hardness. This work provides important theoretical guidance and practical methodology for defect control, performance optimization, and engineering applications of FGMs.
Förderung
- National Defense Pre-research Projects
Zitieren
APA
Liu, J., Xiong, C., Cui, K., Yin, J., Ye, Z., Zhu, X., Zou, Y., Zhang, Y., & Liu, H. (2026). Thermo-mechanical coupling analysis and experimental study of IN718 and SS316L functionally graded materials fabricated by laser-directed energy deposition. Materials Research Express, 13(10), 106506. https://doi.org/10.1088/2053-1591/ae6d83
Vancouver
Liu J, Xiong C, Cui K, Yin J, Ye Z, Zhu X, et al. Thermo-mechanical coupling analysis and experimental study of IN718 and SS316L functionally graded materials fabricated by laser-directed energy deposition. Materials Research Express. 2026;13(10):106506. doi:10.1088/2053-1591/ae6d83
BibTeX
@article{Liu2026,
author = {Liu, Jialong and Xiong, Chao and Cui, Kaibo and Yin, Junhui and Ye, Zimeng and Zhu, Xiujie and Zou, Youchun and Zhang, Yu and Liu, Hao},
title = {Thermo-mechanical coupling analysis and experimental study of IN718 and SS316L functionally graded materials fabricated by laser-directed energy deposition},
journal = {Materials Research Express},
year = {2026},
volume = {13},
number = {10},
pages = {106506},
doi = {10.1088/2053-1591/ae6d83}
}
EUVIMED