EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Ti addition on microstructure and sliding wear behavior of FeCoNiCr 0.6 Al 0.4 high-entropy alloy

Zhantao Wang, Manchao Liang, Weijie Liu, Chenglei Wang, Huaxin Cui

Materials Research Express · 01.09.2025 · 12 (9) · 096509

DOI: 10.1088/2053-1591/adee7b ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Research Express, online erschienen am 22.09.2025. Verfasst von Zhantao Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Development Program of Nanning Jiangnan, Technology Development Program of Guilin, Guangxi Science and Technology Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, (FeCoNiCr 0.6 Al 0.4 )100−xTix (x = 0, 2, 4, 6, 8, 10, 12) high-entropy alloy was prepared by arc melting, and the relationship between the phase structure, microstructure, hardness and wear resistance of the alloy was established. The results shows that with the increase of Ti content, the alloy changes from a single FCC phase to FCC phase + BCC phase, and finally to BCC phase. When the content of Ti element increase from 0 to 4%, amplitude modulation decomposition starts to occur in the interdendrite region of the alloy to form a black and white alternating woven structure (A2 phase + B2 phase). With the continuous increase of Ti elemental content, the number of B2 phases in the alloy gradually increases, and the number of A2 phases gradually decreases. Abrasive wear, oxidation wear and delamination wear occurres in the wear process of Tix HEAs. With the increase of Ti content, the short rod-like B2 phase density in the alloy increases gradually, and the phase interface increases, which further inhibits the dislocation movement and makes the wear resistance of the alloy improve continuously. In addition, the alloy can create a wider oxide film during friction, which significantly reduces the wear of the material.

Förderung

  • Technology Development Program of Nanning Jiangnan
  • Technology Development Program of Guilin
  • Guangxi Science and Technology Project
  • Guiding Local Science and Technology Development Fund Project
  • Innovation Project of GUET Graduate Education
  • Engineering Research Center of Electronic Information Materials and Devices, Ministry of Education
  • Guangxi Key Laboratory of Information Materials
  • Guangxi Key Laboratory of Superhard Material

Zitieren

APA

Wang, Z., Liang, M., Liu, W., Wang, C., & Cui, H. (2025). Effect of Ti addition on microstructure and sliding wear behavior of FeCoNiCr 0.6 Al 0.4 high-entropy alloy. Materials Research Express, 12(9), 096509. https://doi.org/10.1088/2053-1591/adee7b

Vancouver

Wang Z, Liang M, Liu W, Wang C, Cui H. Effect of Ti addition on microstructure and sliding wear behavior of FeCoNiCr 0.6 Al 0.4 high-entropy alloy. Materials Research Express. 2025;12(9):096509. doi:10.1088/2053-1591/adee7b

BibTeX
@article{Wang2025,
  author = {Wang, Zhantao and Liang, Manchao and Liu, Weijie and Wang, Chenglei and Cui, Huaxin},
  title = {Effect of Ti addition on microstructure and sliding wear behavior of FeCoNiCr 0.6 Al 0.4 high-entropy alloy},
  journal = {Materials Research Express},
  year = {2025},
  volume = {12},
  number = {9},
  pages = {096509},
  doi = {10.1088/2053-1591/adee7b}
}
Kostenlos starten →