EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Maximising photocurrent in ultrathin Nb-doped MoS2 Schottky solar cells

Jorge Rodríguez Muro, Elvira Cánovas Corbalán, Inés Durán, Patricia Cancho García, Rafailia Rountou, Der-Yuh Lin, Elisa Antolín, Simon Svatek

2D Materials · 11.11.2026

DOI: 10.1088/2053-1583/aec0b2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift 2D Materials, online erschienen am 11.11.2026. Verfasst von Jorge Rodríguez Muro und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Comunidad de Madrid, NextGenerationEU.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In ultrathin transition-metal dichalcogenide (TMDC) Schottky solar cells, photocurrent is difficult to control when rectifying-junction formation and hole extraction cannot be optimised independently. Here we separate these functions in Nb-doped MoS2 devices and show that the photogenerated current can be predicted to first order from its optical limit. Using dry van der Waals assembly, we contact p-MoS2 through a heavily doped p+-MoS2/Au hole-extraction layer while independently defining the rectifying interface with Cr or Ag. Scanning photocurrent microscopy localizes the response to the metal/p-MoS2 overlap, and EQE combined with transfer-matrix modelling shows that the spectral photocurrent follows absorptance in the MoS2 layer of the full optical stack. In a before-and-after test on the same device, adding h-BN increases the modelled absorbed-photon limit and the measured photovoltaic output, consistent with h-BN modifying MoS2 absorptance through thin-film interference in the multilayer stack. Across Ag-contacted devices, the experimental photogenerated current density scales with the stack-specific optical-limit current density and is described by an effective AM1.5G-weighted collection factor of approximately 0.86. A representative device reaches 3.0% power conversion efficiency under AM1.5G illumination. These results provide a practical way to predict and improve photocurrent in ultrathin TMDC Schottky photovoltaics from measurable stack parameters.

Förderung

  • Comunidad de Madrid
  • NextGenerationEU

Zitieren

APA

Muro, J. R., Corbalán, E. C., Durán, I., García, P. C., Rountou, R., Lin, D., Antolín, E., & Svatek, S. (2026). Maximising photocurrent in ultrathin Nb-doped MoS2 Schottky solar cells. 2D Materials. https://doi.org/10.1088/2053-1583/aec0b2

Vancouver

Muro JR, Corbalán EC, Durán I, García PC, Rountou R, Lin D, et al. Maximising photocurrent in ultrathin Nb-doped MoS2 Schottky solar cells. 2D Materials. 2026. doi:10.1088/2053-1583/aec0b2

BibTeX
@article{Muro2026,
  author = {Muro, Jorge Rodríguez and Corbalán, Elvira Cánovas and Durán, Inés and García, Patricia Cancho and Rountou, Rafailia and Lin, Der-Yuh and Antolín, Elisa and Svatek, Simon},
  title = {Maximising photocurrent in ultrathin Nb-doped MoS2 Schottky solar cells},
  journal = {2D Materials},
  year = {2026},
  doi = {10.1088/2053-1583/aec0b2}
}
Kostenlos starten →