Laser-sharkskin biomimetic textures with MoS 2 composite coating for ultra-low friction TC6 titanium
Surface Topography: Metrology and Properties · 01.06.2026 · 14 (2) · 025018
DOI: 10.1088/2051-672x/ae773c ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Topography: Metrology and Properties, online erschienen am 11.06.2026. Verfasst von Yan Xiaoni und 5 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Gefördert von: Science and Technology Project of Beilin District, of the Shaanxi Provincial Education Department, Project of Shaanxi Provincial Department of Science and Technology.
Abstract (Originalsprache)
The TC6 titanium alloy used in components such as shock absorber struts and bearing seats shows certain levels of friction and wear. In order to improve its service life and performance, this paper adopts femtosecond laser to prepare dentate bionic texture surface, and uses MoS 2 composite coating to enhance the lubrication effect. The friction velocity of TC6 surface under 6 N load and 20 mm s −1 is studied. Tribological properties under the condition of 10 min friction time. The results show that: (1) Dentate texture can effectively reduce friction and wear phenomenon, and is affected by area density, among which the texture array with a density of 14% has the best anti-friction and wear effect. Compared with smooth surface, the friction coefficient is reduced by about 71%, and the wear volume is reduced by about 98%, which is attributed to the hardening effect of laser on the texture edge to make it withstand greater contact stress. The existence of texture pit reduces the actual friction contact surface, and has a certain absorption effect on abrasive debris, thus slowing down the phenomenon of abrasive wear in the friction process. (2) The layered structure of MoS 2 composite coating greatly improves the surface lubrication effect. Similarly, 14% density is the optimal anti-friction wear-resistant texture array, and the friction coefficient and wear volume are only 26% and 0.68% of the smooth surface. The coating medium inside the texture pit is continuously transported to the friction interface, playing a role in continuous lubrication. The synergistic effect of the dentate texture and MoS 2 composite coating makes the tribological properties of TC6 greatly improved.
Förderung
- Science and Technology Project of Beilin District
- of the Shaanxi Provincial Education Department
- Project of Shaanxi Provincial Department of Science and Technology
- Open Fund of State Key Laboratory of Solid Lubrication
Zitieren
APA
Xiaoni, Y., Yicong, L., Nan, G., Junde, G., Zhenyu, Z., & Wei, Y. (2026). Laser-sharkskin biomimetic textures with MoS 2 composite coating for ultra-low friction TC6 titanium. Surface Topography: Metrology and Properties, 14(2), 025018. https://doi.org/10.1088/2051-672x/ae773c
Vancouver
Xiaoni Y, Yicong L, Nan G, Junde G, Zhenyu Z, Wei Y. Laser-sharkskin biomimetic textures with MoS 2 composite coating for ultra-low friction TC6 titanium. Surface Topography: Metrology and Properties. 2026;14(2):025018. doi:10.1088/2051-672x/ae773c
BibTeX
@article{Xiaoni2026,
author = {Xiaoni, Yan and Yicong, Liu and Nan, Geng and Junde, Guo and Zhenyu, Zhang and Wei, Yang},
title = {Laser-sharkskin biomimetic textures with MoS 2 composite coating for ultra-low friction TC6 titanium},
journal = {Surface Topography: Metrology and Properties},
year = {2026},
volume = {14},
number = {2},
pages = {025018},
doi = {10.1088/2051-672x/ae773c}
}
EUVIMED