EUVIMEDEUVIMED entdecken
Crossref

Effect of normal load on the fretting tribocorrosion behaviors of 316L stainless steel

Qinghuan Tao, Wenan Wang, Weihao Ni

Surface Topography: Metrology and Properties · 31.12.2025 · 13 (4) · 045014

DOI: 10.1088/2051-672x/ae23ec ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Topography: Metrology and Properties, online erschienen am 03.12.2025. Verfasst von Qinghuan Tao und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fretting tribocorrosion of 316L stainless steel (SS) is highly common in practical applications in the marine environment. The fretting tribocorrosion behavior of 316L SS under different normal loads in distilled water and 3.5% NaCl solution was systematically investigated using a fretting test rig combined with in situ electrochemical measurement techniques. Results showed that increasing the normal load from 30 N to 60 N led to fretting damage degrees that were 2.67 times higher in distilled water and 0.91 times higher in 3.5% NaCl solution, respectively, accompanied by a 34.04% and 28.57% decrease in electrochemical corrosion resistance. Finite element simulations showed that the maximum contact stress increased by 18.5% at 30 N and 20.1% at 60 N as the fretting cycles rose from 0.48 × 10 5 to 1.44 × 10 5 cycles. The dominant damage mechanisms were abrasive wear, fatigue spalling, corrosion wear, and crack propagation. With increasing normal load, the synergistic effect between wear and corrosion was decreased, while pure mechanical wear became dominant.

Zitieren

APA

Tao, Q., Wang, W., & Ni, W. (2025). Effect of normal load on the fretting tribocorrosion behaviors of 316L stainless steel. Surface Topography: Metrology and Properties, 13(4), 045014. https://doi.org/10.1088/2051-672x/ae23ec

Vancouver

Tao Q, Wang W, Ni W. Effect of normal load on the fretting tribocorrosion behaviors of 316L stainless steel. Surface Topography: Metrology and Properties. 2025;13(4):045014. doi:10.1088/2051-672x/ae23ec

BibTeX
@article{Tao2025,
  author = {Tao, Qinghuan and Wang, Wenan and Ni, Weihao},
  title = {Effect of normal load on the fretting tribocorrosion behaviors of 316L stainless steel},
  journal = {Surface Topography: Metrology and Properties},
  year = {2025},
  volume = {13},
  number = {4},
  pages = {045014},
  doi = {10.1088/2051-672x/ae23ec}
}
Kostenlos starten →