Large-scale manufacturing of precisely patterned flexible soft tissue implants with high porosity
Biofabrication · 01.09.2026 · 18 (3) · 035009
DOI: 10.1088/1758-5090/ae7697 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biofabrication, online erschienen am 15.06.2026. Verfasst von Amal Shabazz und 6 weiteren Autor:innen. Beteiligte Einrichtung: Fischell Department of Bioengineering, University of Maryland, College Park, MD, United States of America. Hauptthemen laut MEDLINE: Tissue Engineering, Tissue Scaffolds, Breast Implants. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institutes of Health, National Science Foundation Graduate Research Fellowship Program, Maryland Innovation Initiative.
Abstract (Originalsprache)
As improvements in material compatibility are achieved, stereolithography (SLA) 3D printing allows for the prototyping of soft tissue constructs with high reproducibility and precision. To streamline the Food and Drug Administration approval process, clinical-grade manufacturing must be validated. Here, we present a manufacturing process and post-manufacturing analysis for soft-tissue implants used to reconstruct the nipple-areolar complex (NAC). The NAC is a specialized soft tissue structure that influences aesthetic outcomes in breast reconstruction. Physiologically-sized NAC implants were designed and printed in a good manufacturing practice facility using Formlabs Biomed Elastic 50 A (E 50 A) and Biomed Flexible 80 A (F 80 A) resins. Documentation and procedures were established to standardize and control macroporous soft-tissue implant manufacturing. Post-manufacturing classification based on architectural and mechanical features defined the minimum acceptable criteria for future production. E 50 A macroporous implants resembled the modulus of soft tissue, while F 80 A geometries showed higher reproducibility and preservation of fine architectural features. SLA printing enabled the patterning of implants with porosities of 74.65% and 72.74% for 0.4- and 0.5- mm geometries, respectively. 3D printed implants supported the infusion of gelatin methacryloyl for the delivery of biological cues, with a filling efficiency greater than 97%. This manufacturing platform achieves reproducible fabrication of soft-tissue implants that meet both structural and mechanical requirements. Further, the presented methodology can be adapted for a wide range of complex soft tissues to advance regenerative medicine solutions toward regulatory approval and eventual clinical integration.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Fischell Department of Bioengineering, University of Maryland, College Park, MD, United States of America.
- Center for Engineering Complex Tissues, University of Maryland, College Park, MD, United States of America.
- The LaunchPort, Baltimore, MD, United States of America.
- Materic, Baltimore, MD, United States of America.
ORCID-Profile: Amal Shabazz, Alexandra P Christensen, Sahar Vakili, John P Fisher
Förderung
- National Institutes of Health
- National Science Foundation Graduate Research Fellowship Program
- Maryland Innovation Initiative
Zitieren
APA
Shabazz, A., Christensen, A. P., Garvey, D., Pallotta, M., Vakili, S., Farias, S., & Fisher, J. P. (2026). Large-scale manufacturing of precisely patterned flexible soft tissue implants with high porosity. Biofabrication, 18(3), 035009. https://doi.org/10.1088/1758-5090/ae7697
Vancouver
Shabazz A, Christensen AP, Garvey D, Pallotta M, Vakili S, Farias S, et al. Large-scale manufacturing of precisely patterned flexible soft tissue implants with high porosity. Biofabrication. 2026;18(3):035009. doi:10.1088/1758-5090/ae7697
BibTeX
@article{Shabazz2026,
author = {Shabazz, Amal and Christensen, Alexandra P and Garvey, David and Pallotta, Mike and Vakili, Sahar and Farias, Stephen and Fisher, John P},
title = {Large-scale manufacturing of precisely patterned flexible soft tissue implants with high porosity},
journal = {Biofabrication},
year = {2026},
volume = {18},
number = {3},
pages = {035009},
doi = {10.1088/1758-5090/ae7697}
}
EUVIMED