EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D printed PGCL@PLA/10CSPL composite scaffolds loaded with fibronectin 1 for intervertebral disc degeneration treatment

Weilin Zhang, Siyuan Chen, Shengbang Huang, Zhencong Li, Zhongwei Wang, Zhiwen Dai, Jinguo Liang, Hongrui Rong, Qianqian Ouyang, Weixiong Guo, Yen Wei, Jinsong Wei iD

Biofabrication · 2025

DOI: 10.1088/1758-5090/ad998f ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biofabrication, 2025. Verfasst von Weilin Zhang und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Spinal Degeneration and Deformity Surgery, Affiliated Hospital of Guangdong Medical University, Zhanjiang 524001, People's Republic of …. Hauptthemen laut MEDLINE: Intervertebral Disc Degeneration, Printing, Three-Dimensional, Tissue Scaffolds, Fibronectins. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: High-level talent research in Affiliated Hospital of Guangdong Medical University, Guangdong Basic and Applied Basic Research Foundation, Guangdong Medical Science and Technology Research Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Restoration of disc height and biomechanical function is essential for intervertebral disc degeneration (IDD) treatment. Removing abnormal nucleus pulposus (NP) tissue is an important step to facilitate bony fusion during the healing process. We analyzed publicly available single-cell transcriptome data for human normal and degenerative NP to identify genes associated with NP degeneration. A novel poly(glycolide-co-caprolactone)@polylactide (PLA)-b-aniline pentamer (AP)-b-PLA/chitosan- ϵ -polylysine (PGCL@1PAP/10CSPL) scaffold with good biocompatibility and electroactivity was designed and fabricated as an implant for IDD treatment using 3D printing technology. The PGCL@1PAP/10CSPL scaffold exhibited superior hydrophilicity, mechanical properties, cytocompatibility, and antibacterial activity compared to PGCL. Fibronectin 1 (FN1), identified from single-cell transcriptome analysis, was loaded into the PGCL@1PAP/10CSPL scaffold to accelerate the abnormal NP degeneration. In vitro and in vivo experiments indicated that the PGCL@1PAP/10CSPL-FN1 scaffold enhanced osteogenic differentiation, promoted angiogenesis, and facilitated the removal of damaged disc tissue. This study introduces a novel implant system with desirable mechanical strength and unique bone-promoting and vascularizing properties for lumbar interbody fusion in IDD treatment.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Intervertebral Disc DegenerationPrinting, Three-DimensionalTissue ScaffoldsFibronectinsPolyestersChitosanNucleus PulposusHumansAnimalsPolylysineOsteogenesisRabbits

Stichwörter der Autor:innen

fibronectin 1intervertebral disc degenerationpoly(glycolide-co-caprolactone)

Substanzen

FibronectinsPolyestersChitosanPolylysinepoly(lactide)

Autor:innen und Institutionen

  • Department of Spinal Degeneration and Deformity Surgery, Affiliated Hospital of Guangdong Medical University, Zhanjiang 524001, People's Republic of China.
  • The Marine Biomedical Research Institute, Guangdong Medical University, Zhanjiang 524023, People's Republic of China.
  • The Key Laboratory of Bioorganic Phosphorus Chemistry & Chemical Biology (Ministry of Education), Department of Chemistry, Tsinghua University, Beijing 100084, People's Republic of China.
  • School of Materials Science and Engineering, North Minzu University, Yinchuan 750021, People's Republic of China.
  • Department of Chemistry and Center for Nanotechnology, Chung Yuan Christian University, Chung Li District, Taoyuan City 32023, Taiwan.

ORCID-Profile: Jinsong Wei

Förderung

  • High-level talent research in Affiliated Hospital of Guangdong Medical University
  • Guangdong Basic and Applied Basic Research Foundation
  • Guangdong Medical Science and Technology Research Fund

Zitieren

APA

Zhang, W., Chen, S., Huang, S., Li, Z., Wang, Z., Dai, Z., Liang, J., Rong, H., Ouyang, Q., Guo, W., Wei, Y., & Wei, J. (2025). 3D printed PGCL@PLA/10CSPL composite scaffolds loaded with fibronectin 1 for intervertebral disc degeneration treatment. Biofabrication. https://doi.org/10.1088/1758-5090/ad998f

Vancouver

Zhang W, Chen S, Huang S, Li Z, Wang Z, Dai Z, et al. 3D printed PGCL@PLA/10CSPL composite scaffolds loaded with fibronectin 1 for intervertebral disc degeneration treatment. Biofabrication. 2025. doi:10.1088/1758-5090/ad998f

BibTeX
@article{Zhang2025,
  author = {Zhang, Weilin and Chen, Siyuan and Huang, Shengbang and Li, Zhencong and Wang, Zhongwei and Dai, Zhiwen and Liang, Jinguo and Rong, Hongrui and Ouyang, Qianqian and Guo, Weixiong and Wei, Yen and Wei, Jinsong},
  title = {3D printed PGCL@PLA/10CSPL composite scaffolds loaded with fibronectin 1 for intervertebral disc degeneration treatment},
  journal = {Biofabrication},
  year = {2025},
  doi = {10.1088/1758-5090/ad998f}
}
Kostenlos starten →