EUVIMEDEUVIMED entdecken
Crossref

3D printed polycaprolactone/poly (L-lactide-co-ϵ-caprolactone) composite ureteral stent with biodegradable and antibacterial properties

Yanjiao Teng, Xinyan Wang, Lin Song, Jianing Yang, Shike Hou, Qi Lv, Li Jiang iD, Yong Guan, Jie Shi iD

Biomedical Materials · 2025

DOI: 10.1088/1748-605x/adb2ce ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Materials, 2025. Verfasst von Yanjiao Teng und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Disaster and Emergency Medicine, Tianjin University, Tianjin 300072, People's Republic of China. Hauptthemen laut MEDLINE: Polyesters, Anti-Bacterial Agents, Printing, Three-Dimensional, Stents. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: Tianjin Science and Technology Plan, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The clinical application of biodegradable ureteral stents holds significant potential. There is an urgent need to develop new materials for ureteral stents to address the limitations related to performance degradation and antibacterial properties observed in current designs. Here, we developed a Polycaprolactone (PCL)/Poly (L-lactide-co- ϵ -caprolactone) (PLCL) composite ureteral stent by three-dimensional (3D) printing, which exhibits biodegradable and antibacterial properties. Silver nanoparticles (AgNPs) were bonded to the surface of the stent through the polymerization of dopamine (PDA) and coating with type I collagen (Col I). The ureteral stent (PP-PDA-Ag-Col) had a densely spiraled structure and higher hydrophilicity. The release behavior of silver ions from the stent was found to be slow and continuous when coated with AgNPs, which can enable long-term antibacterial effects after being implanted in vivo . Additionally, in vitro degradation experiments demonstrated that the different ratios of ureteral stents degraded slowly in artificial urine over 6 weeks without compromising functionality. The stent exhibits excellent hemocompatibility and cell compatibility. The subcutaneous implantation experiment in Sprague–Dawley rats showed that the PP-PDA-Ag-Col stent degraded slowly in vivo and had good biocompatibility. The stent PCL5/PLCL5 was the most promising ureteral stent regarding antibacterial, mechanical properties, and degradation. The novel 3D-printed PP-PDA-Ag-Col stent exhibits biocompatibility for safe in vivo transplantation and antibacterial properties that reduce reliance on antibiotics. Additionally, its biodegradability eliminates the need for secondary surgical removal, making it a promising option for the clinical application of ureteral stents.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersAnti-Bacterial AgentsPrinting, Three-DimensionalStentsUreterAnimalsRats, Sprague-DawleyRatsSilverMaterials TestingBiocompatible MaterialsMetal NanoparticlesAbsorbable ImplantsHumansStaphylococcus aureusMaleCollagen Type I

Stichwörter der Autor:innen

3D printing biomaterialsPCL/PLCLantibacterialbiodegradableureteral stent

Substanzen

PolyestersAnti-Bacterial AgentspolycaprolactoneSilverBiocompatible Materialslactide-caprolactone copolymerCollagen Type I

Autor:innen und Institutionen

  • School of Disaster and Emergency Medicine, Tianjin University, Tianjin 300072, People's Republic of China.
  • Key Laboratory for Disaster Medicine Technology, Tianjin 300072, People's Republic of China.
  • Wenzhou Safety (Emergency) Institute of Tianjin University, Wenzhou 325026, People's Republic of China.
  • Tianjin Children's Hospital/Tianjin University Children's Hospital, Tianjin 300074, People's Republic of China.
  • Department of Urology, Dalian Women and Children's Medical Group, Dalian 116037, People's Republic of China.
  • State Key Laboratory of Pharmaceutical Biotechnology, School of Life Sciences, Nanjing University, Nanjing 210000, People's Republic of China.

ORCID-Profile: Li Jiang, Jie Shi

Förderung

  • Tianjin Science and Technology Plan
  • National Natural Science Foundation of China

Zitieren

APA

Teng, Y., Wang, X., Song, L., Yang, J., Hou, S., Lv, Q., Jiang, L., Guan, Y., & Shi, J. (2025). 3D printed polycaprolactone/poly (L-lactide-co-ϵ-caprolactone) composite ureteral stent with biodegradable and antibacterial properties. Biomedical Materials. https://doi.org/10.1088/1748-605x/adb2ce

Vancouver

Teng Y, Wang X, Song L, Yang J, Hou S, Lv Q, et al. 3D printed polycaprolactone/poly (L-lactide-co-ϵ-caprolactone) composite ureteral stent with biodegradable and antibacterial properties. Biomedical Materials. 2025. doi:10.1088/1748-605x/adb2ce

BibTeX
@article{Teng2025,
  author = {Teng, Yanjiao and Wang, Xinyan and Song, Lin and Yang, Jianing and Hou, Shike and Lv, Qi and Jiang, Li and Guan, Yong and Shi, Jie},
  title = {3D printed polycaprolactone/poly (L-lactide-co-ϵ-caprolactone) composite ureteral stent with biodegradable and antibacterial properties},
  journal = {Biomedical Materials},
  year = {2025},
  doi = {10.1088/1748-605x/adb2ce}
}
Kostenlos starten →