EUVIMEDEUVIMED entdecken
Crossref

Design and analysis of a bending–torsion coupled bio-inspired claw attachment mechanism for variable-diameter curved surfaces

Zhouyi Wang iD, Wei Zhao, Chaofu Zhang iD, Liuwei Wang, Weiming Li, Aihong Ji iD

Bioinspiration & Biomimetics · 31.12.2026 · 21 (6) · 066002

DOI: 10.1088/1748-3190/aebb84 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioinspiration & Biomimetics, online erschienen am 11.11.2026. Verfasst von Zhouyi Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, People's Republic of China. Hauptthemen laut MEDLINE: Hoof and Claw, Birds, Biomimetics, Biomimetic Materials. Die Arbeit nennt 46 Literaturangaben. Gefördert von: The National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reliable aerial perching on variable-diameter curved surfaces requires both sufficient grasping preload and conformal interfacial contact, whereas conventional underactuated bird-claw-inspired mechanisms primarily accommodate in-plane geometric variations and therefore have limited adaptability to surfaces with spatially varying curvature. This study presents a bending–torsion coupled bird-claw-inspired attachment mechanism for variable-diameter curved surfaces. The key design combines direction-selective compliant joints with a bilateral force-balanced tendon transmission, allowing asymmetric contact reactions to passively reorient individual claw segments. This passive reorientation improves interfacial conformity during grasping and provides more favorable contact and sealing conditions for dry adhesion and vacuum suction. A grasping-stability model was employed to optimize the key structural parameters, followed by mechanical characterization of the compliant joints and attachment tests on smooth acrylic cylinders with diameters of 60–120 mm and cones with apex angles of 20°–60°. The equivalent bending stiffness of the compliant joint was tunable from 0.2 to 1.0 N·mm/°, while high torsional compliance was maintained within the small-angle working range. The maximum circumferential attachment moment reached 1.65 N·m on a 120 mm diameter cylinder and 0.60 N·m on a 60° apex-angle cone. A manually controlled flight experiment further demonstrated successful perching on a 20° conical surface. These results demonstrate that bending–torsion coupled compliance can broaden the geometric adaptation range of underactuated claw-based attachment mechanisms and provide a feasible structural approach for aerial perching on variable-diameter curved surfaces.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Hoof and ClawBirdsBiomimeticsBiomimetic MaterialsAnimalsSurface PropertiesModels, BiologicalBiomechanical PhenomenaEquipment Design

Stichwörter der Autor:innen

aerial perchingbending–torsion coupled compliancebio-inspired avian clawirregular curved surfacesmulti-mechanism attachment

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, People's Republic of China.
  • School of Mechanical Engineering, Nanjing University of Industry Technology, Nanjing 210023, People's Republic of China.

ORCID-Profile: Zhouyi Wang, Chaofu Zhang, Aihong Ji

Förderung

  • The National Natural Science Foundation of China

Zitieren

APA

Wang, Z., Zhao, W., Zhang, C., Wang, L., Li, W., & Ji, A. (2026). Design and analysis of a bending–torsion coupled bio-inspired claw attachment mechanism for variable-diameter curved surfaces. Bioinspiration & Biomimetics, 21(6), 066002. https://doi.org/10.1088/1748-3190/aebb84

Vancouver

Wang Z, Zhao W, Zhang C, Wang L, Li W, Ji A. Design and analysis of a bending–torsion coupled bio-inspired claw attachment mechanism for variable-diameter curved surfaces. Bioinspiration & Biomimetics. 2026;21(6):066002. doi:10.1088/1748-3190/aebb84

BibTeX
@article{Wang2026,
  author = {Wang, Zhouyi and Zhao, Wei and Zhang, Chaofu and Wang, Liuwei and Li, Weiming and Ji, Aihong},
  title = {Design and analysis of a bending–torsion coupled bio-inspired claw attachment mechanism for variable-diameter curved surfaces},
  journal = {Bioinspiration & Biomimetics},
  year = {2026},
  volume = {21},
  number = {6},
  pages = {066002},
  doi = {10.1088/1748-3190/aebb84}
}
Kostenlos starten →