EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Exploring the influence of diameter-to-length ratios on soft robot performance in soil environments

Mohammed N Elagroudy iD, René van de Molengraft iD, Femke E van Beek iD

Bioinspiration & Biomimetics · 31.08.2026 · 21 (4) · 046008

DOI: 10.1088/1748-3190/ae786b ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bioinspiration & Biomimetics, online erschienen am 24.06.2026. Verfasst von Mohammed N Elagroudy und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Eindhoven University of Technology, Eindhoven, 5600 MB, The Netherlands. Hauptthemen laut MEDLINE: Soil, Robotics, Oligochaeta, Biomimetics. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 4TU-programme High Tech for a Sustainable Future.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Soft robotics holds large promises for precision agriculture, as it has the potential to overcome challenges associated with subsoil exploration, including precision maneuvering, and minimizing soil disturbance. While prior studies have evaluated soft robots in tubes, glass beads, or sand, we perform empirical measurements and validations in real soil environments and show how the diameter-to-length (D/L) ratio affects the penetration performance, taking inspiration from earthworms’ D/L ratios. Through a series of experiments, this study investigated the locomotion capabilities and the behavior of various robot designs when submerged within soil. We fabricated five pneumatically-actuated soft robots with different D/L ratios, measured their vertical burrowing depth, their axial force generation, and characterized the total drag force versus depth. We introduced a capability ratio comparing available axial force to experienced total drag at depth, giving an estimate of the theoretical depth that each design could reach before stalling. We evaluated buckling forces using Euler limits under mixed end conditions representing soil confinement and available lateral support. Results show that designs with D/L ratios similar to that of an earthworm exhibit lower drag forces, but D/L is not the only parameter influencing performance. The largest-diameter design generated the highest axial force but underperformed due to buckling, while the mid-range geometry achieved the greatest depth through a balanced combination of axial force generation, drag, and stability. These findings highlight the importance of tailored design parameters for efficient subsoil exploration, the relevance of mimicking natural proportions, and demonstrate that force-based metrics can provide practical performance estimates for soft burrowing robots.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SoilRoboticsOligochaetaBiomimeticsAnimalsEquipment DesignLocomotionAgriculture

Stichwörter der Autor:innen

agricultureburrowing robotsearthworm-inspired robotsgranular mediasoft roboticssubsoil locomotion

Substanzen

Soil

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Eindhoven University of Technology, Eindhoven, 5600 MB, The Netherlands.

ORCID-Profile: Mohammed N Elagroudy, René van de Molengraft, Femke E van Beek

Förderung

  • 4TU-programme High Tech for a Sustainable Future

Zitieren

APA

Elagroudy, M. N., van de Molengraft, R., & van Beek, F. E. (2026). Exploring the influence of diameter-to-length ratios on soft robot performance in soil environments. Bioinspiration & Biomimetics, 21(4), 046008. https://doi.org/10.1088/1748-3190/ae786b

Vancouver

Elagroudy MN, van de Molengraft R, van Beek FE. Exploring the influence of diameter-to-length ratios on soft robot performance in soil environments. Bioinspiration & Biomimetics. 2026;21(4):046008. doi:10.1088/1748-3190/ae786b

BibTeX
@article{Elagroudy2026,
  author = {Elagroudy, Mohammed N and van de Molengraft, René and van Beek, Femke E},
  title = {Exploring the influence of diameter-to-length ratios on soft robot performance in soil environments},
  journal = {Bioinspiration & Biomimetics},
  year = {2026},
  volume = {21},
  number = {4},
  pages = {046008},
  doi = {10.1088/1748-3190/ae786b}
}
Kostenlos starten →