EUVIMEDEUVIMED entdecken
Crossref

Detection of background boron impurity in multisectoral type IIa HPHT single-crystal diamond plate by means of optical and admittance spectroscopy techniques

Anna Solomnikova, Nikita Telitsyn, Ivan Emelyanov, Ksenia Brusina, Igor Klepikov, Evgeny Vasilev, Vasily Zubkov

Physica Scripta · 13.11.2026 · 101 (45) · 455910

DOI: 10.1088/1402-4896/aeba55 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 12.11.2026. Verfasst von Anna Solomnikova und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: Saint Petersburg Electrotechnical University “LETI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The object of the present study is a single-crystal multisectorial diamond plate synthesized by high pressure-high temperature technique in Fe–Co environment with boron and nitrogen getters. These undoped type IIa diamonds find extensive use in x-ray optics, UV photodetectors, and ionizing radiation detectors, all of which necessitate precise control over the samples’ impurity content. Complementary non-destructive optical and electrical techniques were employed in a comprehensive study to assess the background concentration of boron in sectors , , of the plate. The discussion addresses the features of the application of these methods for detecting extremely low concentrations and the spatial heterogeneity of the measured values across the sectors of type IIa diamond plates. UV transmission spectra near the fundamental edge were obtained and mathematical modeling was performed to study exciton and phonon effects affecting the diamond absorption in this spectral range. The room temperature FTIR spectra was shown to be insufficiently sensitive for controlling impurities in the plate; the spectra measured at the liquid nitrogen temperature allowed us to determine the boron concentration in the sector as 3.5 ppb (6.3 × 10 14 cm –3 ). The differences in current–voltage characteristics measured in various points of the plate are discussed. The performed capacitance–voltage measurements showed a strong dependence on the test signal frequency and enabled the assessment of low free charge concentrations (at the level of 10 15 cm −3 and below, with the value varying by plate sector and frequency). The activation energy of boron was assessed by electrical measurements in DC (370 meV) and AC (345 meV) modes, the differences in the obtained values are discussed. Overall, this study shows that electrical measurements provide a non-destructive approach capable of determination background impurity content in specially undoped single-crystal diamond below the limits of conventional optical methods.

Förderung

  • Saint Petersburg Electrotechnical University “LETI

Zitieren

APA

Solomnikova, A., Telitsyn, N., Emelyanov, I., Brusina, K., Klepikov, I., Vasilev, E., & Zubkov, V. (2026). Detection of background boron impurity in multisectoral type IIa HPHT single-crystal diamond plate by means of optical and admittance spectroscopy techniques. Physica Scripta, 101(45), 455910. https://doi.org/10.1088/1402-4896/aeba55

Vancouver

Solomnikova A, Telitsyn N, Emelyanov I, Brusina K, Klepikov I, Vasilev E, et al. Detection of background boron impurity in multisectoral type IIa HPHT single-crystal diamond plate by means of optical and admittance spectroscopy techniques. Physica Scripta. 2026;101(45):455910. doi:10.1088/1402-4896/aeba55

BibTeX
@article{Solomnikova2026,
  author = {Solomnikova, Anna and Telitsyn, Nikita and Emelyanov, Ivan and Brusina, Ksenia and Klepikov, Igor and Vasilev, Evgeny and Zubkov, Vasily},
  title = {Detection of background boron impurity in multisectoral type IIa HPHT single-crystal diamond plate by means of optical and admittance spectroscopy techniques},
  journal = {Physica Scripta},
  year = {2026},
  volume = {101},
  number = {45},
  pages = {455910},
  doi = {10.1088/1402-4896/aeba55}
}
Kostenlos starten →