Grain-size-resolved defect modelling and interface optimisation in 2D/3D/2D perovskite solar cells: a numerical study
Physica Scripta · 16.10.2026 · 101 (41) · 415905
DOI: 10.1088/1402-4896/aeaf1e ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 13.10.2026. Verfasst von Sajjad Rajabi-Ghaleh und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 63 Literaturangaben.
Abstract (Originalsprache)
Grain boundary defect density and interfacial recombination are the two dominant loss mechanisms limiting perovskite solar cell performance, yet they are rarely optimised within a unified theoretical framework. Here, we extend the corrected Matthiessen’s rule formulation for grain-size-dependent defect density—originally established for three-dimensional (3D) perovskites in our prior work (Olyaeefar et al 2018 Sol. Energy Mater. Sol. Cells 180 76–82) to two-dimensional (2D) perovskite systems, accounting for the 2D adaptation of the corrected Matthiessen’s rule framework consists primarily of a revised grain-boundary defect density N gb . The resulting grain-size-resolved defect densities are used directly as inputs to drift-diffusion simulations in S C A P S − 1 D , establishing a physically consistent link between film microstructure and device behaviour. Photoluminescence quantum yield analysis confirms that 2D perovskites exhibit higher radiative efficiency at small grain sizes due to strong excitonic confinement, and the extracted recombination coefficients constrain the defect density parameters used in simulation. Five device architectures—single-layer 3D, 2D/3D, 2D/I/3D, 2D/3D/2D, and 2D/I/3D/I/2D—are systematically compared under identical modelling conditions. The 3D baseline ( P C E = 16.03 % ) is calibrated against and validated by experimental data. The optimised 2D/I/3D/I/2D architecture, incorporating quasi-2D Ruddlesden–Popper interlayers at both 2D/3D interfaces, achieves a simulated PCE of 22.22 % , with V oc = 1.22 V and F F = 86.29 % , improvements attributed to suppressed trap-assisted recombination and enhanced charge extraction at engineered interfaces. This work provides a transferable framework for simultaneously optimising grain structure and interface design in multi-dimensional perovskite photovoltaics.
Zitieren
APA
Rajabi-Ghaleh, S., Kheradmand, R., Ahmadi-Kandjani, S., Olyaeefar, B., & Fathalizadeh, N. (2026). Grain-size-resolved defect modelling and interface optimisation in 2D/3D/2D perovskite solar cells: a numerical study. Physica Scripta, 101(41), 415905. https://doi.org/10.1088/1402-4896/aeaf1e
Vancouver
Rajabi-Ghaleh S, Kheradmand R, Ahmadi-Kandjani S, Olyaeefar B, Fathalizadeh N. Grain-size-resolved defect modelling and interface optimisation in 2D/3D/2D perovskite solar cells: a numerical study. Physica Scripta. 2026;101(41):415905. doi:10.1088/1402-4896/aeaf1e
BibTeX
@article{RajabiGhaleh2026,
author = {Rajabi-Ghaleh, Sajjad and Kheradmand, Reza and Ahmadi-Kandjani, Sohrab and Olyaeefar, Babak and Fathalizadeh, Nima},
title = {Grain-size-resolved defect modelling and interface optimisation in 2D/3D/2D perovskite solar cells: a numerical study},
journal = {Physica Scripta},
year = {2026},
volume = {101},
number = {41},
pages = {415905},
doi = {10.1088/1402-4896/aeaf1e}
}
EUVIMED