EUVIMEDEUVIMED entdecken
Crossref

Design and simulation analysis of a 1550 nm AlGaInAs/InP three-quantum-well single-waveguide asymmetric-barrier semiconductor laser

Jingchun Liu, Haonan Su, Nafei Gu, Lijun Guo

Physica Scripta · 07.08.2026 · 101 (31) · 315512

DOI: 10.1088/1402-4896/ae8ed9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 04.08.2026. Verfasst von Jingchun Liu und 3 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: Project of Science and Technology Department of Jilin Province, National Natural Science Foundation of China, Entrusted Research Project of Enterprises and Institutions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the key bottlenecks of 1550 nm InP-based semiconductor lasers—high valence-band carrier absorption loss in the p-region, low hole injection efficiency, and non-uniform carrier distribution among the quantum wells—this work proposes a three-quantum-well single-waveguide asymmetric-barrier structure based on the AlGaInAs/InP material system, achieving device performance optimization through the synergistic design of band engineering and optical-field control. PICS3D simulations show that with an In 0.74 Ga 0.16 Al 0.10 As well layer and a well thickness of 6 nm, a peak gain of about 4620 cm −1 is obtained at 1.541 μ m. Replacing the symmetric double waveguide with an n-side GaAsSb single waveguide confines the optical mode to the n-side by exploiting the high refractive-index contrast, effectively suppressing absorption loss in the p-region. After replacing the outermost p-side barrier with Al 0.48 In 0.52 As, the electron barrier is raised from 238 meV to 531 meV—about 2.23 times the original value—suppressing electron thermal leakage while barely affecting hole injection. Combined with the synergistic optimization of a 0.7 μ m ridge-waveguide etch depth, a 500 μ m first-order DBR grating, a 135 nm trapezoidal-tooth base width, and a 6° sidewall tilt angle, the optimal operating point yields a coupling coefficient of about 38 cm −1 , a grating reflectivity of about 92%, and a total loss of about 5–8 cm −1 , providing a design scheme that combines theoretical novelty and engineering feasibility for high-power, single-longitudinal-mode, low-divergence 1550 nm semiconductor lasers.

Förderung

  • Project of Science and Technology Department of Jilin Province
  • National Natural Science Foundation of China
  • Entrusted Research Project of Enterprises and Institutions

Zitieren

APA

Liu, J., Su, H., Gu, N., & Guo, L. (2026). Design and simulation analysis of a 1550 nm AlGaInAs/InP three-quantum-well single-waveguide asymmetric-barrier semiconductor laser. Physica Scripta, 101(31), 315512. https://doi.org/10.1088/1402-4896/ae8ed9

Vancouver

Liu J, Su H, Gu N, Guo L. Design and simulation analysis of a 1550 nm AlGaInAs/InP three-quantum-well single-waveguide asymmetric-barrier semiconductor laser. Physica Scripta. 2026;101(31):315512. doi:10.1088/1402-4896/ae8ed9

BibTeX
@article{Liu2026,
  author = {Liu, Jingchun and Su, Haonan and Gu, Nafei and Guo, Lijun},
  title = {Design and simulation analysis of a 1550 nm AlGaInAs/InP three-quantum-well single-waveguide asymmetric-barrier semiconductor laser},
  journal = {Physica Scripta},
  year = {2026},
  volume = {101},
  number = {31},
  pages = {315512},
  doi = {10.1088/1402-4896/ae8ed9}
}
Kostenlos starten →