Evaluation of photocatalytic degradation, corrosion resistance, and magnetic properties of Fe–Co–Mo–Cu–B amorphous ribbons
Physica Scripta · 07.08.2026 · 101 (31) · 315902
DOI: 10.1088/1402-4896/ae8e46 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 31.07.2026. Verfasst von Damla Dilara Çakil und 5 weiteren Autor:innen. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Research Council of Türkiye, Karadeniz Technical University Scientific Research Projects Department.
Abstract (Originalsprache)
The objective of this study was to evaluate the photocatalytic degradation of a methylene blue dye solution by Fe–Co based amorphous ribbons with different compositions. In order to assess the photocatalytic activity of the amorphous ribbons, analysis was conducted under UVC, UVA and visible irradiation. The results of the photocatalysis experiments demonstrated that the Fe38Mo ribbon exhibited the highest performance under UVA irradiation, with a degradation efficiency of 24.5%. Ribbon of other compositions exhibited degradation efficiencies ranging between 13%. and 20%. In the context of corrosion analyses, the (Fe 42 Co 42 ) 84 Cu 1 B 15 ribbon demonstrated the most robust corrosion resistance, exhibiting an i corr value of 1.62E-05 A cm −2 and a corrosion rate of 26.02 mpy (mils per year). The Mo-doped (Fe 63 Co 13 ) 76 Mo 8 Cu 1 B 15 ribbon exhibited an i corr value of 2.84 × 10 −5 A cm −2 and a corrosion rate of 47.95 mpy. The (Fe 57 Co 19 ) 76 Mo 8 Cu 1 B 15 ribbon, which exhibited the lowest corrosion resistance, reached an i corr of 3.92 × 10 −5 A cm −2 and a corrosion rate of 65.85 mpy. The impact of FeCo-based alloys, which are renowned for their magnetic properties, on magnetic properties was also examined. The magnetic saturation value of the Fe70 ribbon increased from 2.21 to 2.37 emu cm −2 under UVC irradiation, while the coercivity value decreased from 1.42 Oe to 0.85 Oe. These results suggest that low-cost Fe–Co based amorphous ribbons may have potential for use as an efficient photocatalyst in environmental pollution removal applications.
Förderung
- Scientific and Technological Research Council of Türkiye
- Karadeniz Technical University Scientific Research Projects Department
Zitieren
APA
Çakil, D. D., Bilgin, S., Sünbül, S. E., Polat, M., Öztürk, S., & İçin, K. (2026). Evaluation of photocatalytic degradation, corrosion resistance, and magnetic properties of Fe–Co–Mo–Cu–B amorphous ribbons. Physica Scripta, 101(31), 315902. https://doi.org/10.1088/1402-4896/ae8e46
Vancouver
Çakil DD, Bilgin S, Sünbül SE, Polat M, Öztürk S, İçin K. Evaluation of photocatalytic degradation, corrosion resistance, and magnetic properties of Fe–Co–Mo–Cu–B amorphous ribbons. Physica Scripta. 2026;101(31):315902. doi:10.1088/1402-4896/ae8e46
BibTeX
@article{akil2026,
author = {Çakil, Damla Dilara and Bilgin, Sümran and Sünbül, S Emre and Polat, Meryem and Öztürk, Sultan and İçin, Kürşat},
title = {Evaluation of photocatalytic degradation, corrosion resistance, and magnetic properties of Fe–Co–Mo–Cu–B amorphous ribbons},
journal = {Physica Scripta},
year = {2026},
volume = {101},
number = {31},
pages = {315902},
doi = {10.1088/1402-4896/ae8e46}
}
EUVIMED