EUVIMEDEUVIMED entdecken
Crossref

Effect of Cr coating thickness on interfacial adhesion and failure mechanisms in Zr–Cr systems

Teng Zhou, Guanghao Song, Mingyan Zhao, Zhenbing Cai, Mingxuan Liang, Jianhong Hu, Jicheng Zhang

Physica Scripta · 31.07.2026 · 101 (30) · 305901

DOI: 10.1088/1402-4896/ae8a90 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 24.07.2026. Verfasst von Teng Zhou und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: Science and Technology Planning Project of Zhejiang Province, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of Cr coating thickness on the interfacial bonding behavior of Zr–Cr. Cr coatings with thicknesses of 15 μ m, 20 μ m, and 25 μ m were prepared on Zr-4 alloy by multi-arc ion plating. Mechanical models of the zirconium alloy with different Cr coating thicknesses were developed by combining uniaxial tensile tests with finite element simulations. The failure process was simulated on the basis of scanning electron microscopy characterization of the post-tensile microstructure. The results show that the strong adhesion of Cr coatings directly enhances the overall mechanical performance of the zirconium alloy. For the thinner coating (15 μ m), the interfacial von Mises and shear stresses were relatively low, which stabilized the Zr–Cr interface and promoted crack propagation into the substrate. In contrast, as the coating thickness increased to 20 and 25 μ m, the interfacial stress state deteriorated significantly. The Von Mises stress increased by approximately 5.9% and 11.2%, respectively, the shear stress increased by approximately 15.5% and 33.1%, respectively, and the crack opening displacement (COD) also increased by approximately 15.4% and 33.6%, respectively. The concurrent increase in the aforementioned stresses and the COD drives the crack propagation path towards the interface, thereby triggering interfacial cracking and coating spallation, which leads to a significant reduction in bonding strength. This study elucidates the significant influence of coating thickness on interfacial integrity from the perspectives of stress evolution and failure mode transformation. The findings address the limitations of conventional experiments in explaining microscopic interfacial evolution mechanisms, providing important theoretical and experimental foundations for the thickness design and performance optimization of chromium coatings on zirconium alloys.

Förderung

  • Science and Technology Planning Project of Zhejiang Province, China

Zitieren

APA

Zhou, T., Song, G., Zhao, M., Cai, Z., Liang, M., Hu, J., & Zhang, J. (2026). Effect of Cr coating thickness on interfacial adhesion and failure mechanisms in Zr–Cr systems. Physica Scripta, 101(30), 305901. https://doi.org/10.1088/1402-4896/ae8a90

Vancouver

Zhou T, Song G, Zhao M, Cai Z, Liang M, Hu J, et al. Effect of Cr coating thickness on interfacial adhesion and failure mechanisms in Zr–Cr systems. Physica Scripta. 2026;101(30):305901. doi:10.1088/1402-4896/ae8a90

BibTeX
@article{Zhou2026,
  author = {Zhou, Teng and Song, Guanghao and Zhao, Mingyan and Cai, Zhenbing and Liang, Mingxuan and Hu, Jianhong and Zhang, Jicheng},
  title = {Effect of Cr coating thickness on interfacial adhesion and failure mechanisms in Zr–Cr systems},
  journal = {Physica Scripta},
  year = {2026},
  volume = {101},
  number = {30},
  pages = {305901},
  doi = {10.1088/1402-4896/ae8a90}
}
Kostenlos starten →