EUVIMEDEUVIMED entdecken
Crossref

Fracture analysis in NbZrTa–based high–entropy carbides using isogeometric adaptive phase–field method

Ajay Kumar, Gurpreet Singh, Raj Kiran

Physica Scripta · 24.07.2026 · 101 (29) · 295401

DOI: 10.1088/1402-4896/ae8485 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 20.07.2026. Verfasst von Ajay Kumar und 2 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the fracture behavior of high-entropy carbides using an adaptive isogeometric phase-field framework that relies on an order of four model, incorporating a cubic stress-degradation function and PHT-spline-based adaptive mesh refinement. The fracture behavior of four experimentally characterized compositions - ( NbZrTa ) C , ( NbZrTaW ) C , ( NbZrTaHf ) C , and ( NbZrTaHfW ) C - is examined across five benchmark geometries: 2D single-edge notched tension, pure shear, three-point bending with varying crack offsets, 3D mode-I tension, and a cubic specimen with an inclined penny-shaped crack. ( NbZrTaW ) C exhibits the highest fracture resistance across most loading configurations, with peak critical loads of F c = 119.99 N under 2D tension and F c = 28.1 N under 3D mode-I loading, consistent with its highest critical energy release rate ( G c = 0.0379 N mm − 1 ). ( NbZrTa ) C , with the lowest G c ( 0.0217 N mm − 1 ), consistently yields the lowest peak loads ( 91.77 N in 2D tension; 23.6 N in 3D mode-I). A parametric study confirms that G c is approximately 21 times more influential than E in determining the composition-dependent fracture resistance, with simulated F c ratios satisfying F c ∝ G c to within 0.3%–12% across all test geometries and compositions. A regularization length sensitivity study further demonstrates that the peak critical load varies by only 6.9%–7.2% across a 3.23 × range in ℓ 0 , confirming the robustness of the results to the choice of regularization parameter. The adaptive PHT-spline refinement concentrates computational effort near the crack front, substantially reducing active degrees of freedom relative to uniform refinement. The numerical results demonstrate the utility of the adaptive framework in resolving complex crack evolution paths while maintaining computational efficiency, and provide a validated computational baseline for future multiscale and anisotropic fracture investigations in advanced ceramic systems.

Zitieren

APA

Kumar, A., Singh, G., & Kiran, R. (2026). Fracture analysis in NbZrTa–based high–entropy carbides using isogeometric adaptive phase–field method. Physica Scripta, 101(29), 295401. https://doi.org/10.1088/1402-4896/ae8485

Vancouver

Kumar A, Singh G, Kiran R. Fracture analysis in NbZrTa–based high–entropy carbides using isogeometric adaptive phase–field method. Physica Scripta. 2026;101(29):295401. doi:10.1088/1402-4896/ae8485

BibTeX
@article{Kumar2026,
  author = {Kumar, Ajay and Singh, Gurpreet and Kiran, Raj},
  title = {Fracture analysis in NbZrTa–based high–entropy carbides using isogeometric adaptive phase–field method},
  journal = {Physica Scripta},
  year = {2026},
  volume = {101},
  number = {29},
  pages = {295401},
  doi = {10.1088/1402-4896/ae8485}
}
Kostenlos starten →