Effects of silver nanoparticle ink thickness on intense pulsed light sintering parameters
Physica Scripta · 03.07.2026 · 101 (26) · 265909
DOI: 10.1088/1402-4896/ae7edf ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 29.06.2026. Verfasst von Xin Li und 2 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Ningxia Province of China.
Abstract (Originalsprache)
Intense pulsed light (IPL) sintering nanoparticle (NP) inks are widely used in additive manufacturing, printed electronics, and other fields. However, the thickness of NP ink can significantly affect the setting of IPL sintering parameters, and improper settings may lead to failure. Currently, there is little research on the mechanism of the effect of NP ink thickness on IPL sintering parameters, so there is a lack of theoretical basis for adjusting IPL sintering parameters for different NP ink thicknesses. Here, we systematically analyzed the energy consumption, temperature distribution, thermal stress evolution, and displacement deformation of NP ink with different thicknesses during typical IPL sintering conditions. The effects of NP ink thickness on potential failures and their underlying mechanisms during IPL sintering were analyzed. We found that under the same IPL sintering conditions, the required sintering energy, substrate temperature, displacement deformation, and the probability of non-uniform sintering all increase with the NP ink thickness. Therefore, for thicker NP ink, it is recommended to use a sintering strategy with a longer sintering duration and lower pulse power to ensure a uniform temperature distribution within the ink, prevent excessive substrate heating, reduce deformation, and thereby reducing the risk of failures. For thinner NP ink, it is suggested to use a medium duration and power approach, which effectively reduces thermal stress while balancing energy consumption. This study can provide guidance for the experimental design and process optimization of IPL sintering NP inks of different thickness.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Ningxia Province of China
Zitieren
APA
Li, X., Yan, D., & Mu, Q. (2026). Effects of silver nanoparticle ink thickness on intense pulsed light sintering parameters. Physica Scripta, 101(26), 265909. https://doi.org/10.1088/1402-4896/ae7edf
Vancouver
Li X, Yan D, Mu Q. Effects of silver nanoparticle ink thickness on intense pulsed light sintering parameters. Physica Scripta. 2026;101(26):265909. doi:10.1088/1402-4896/ae7edf
BibTeX
@article{Li2026,
author = {Li, Xin and Yan, Deke and Mu, Quanyi},
title = {Effects of silver nanoparticle ink thickness on intense pulsed light sintering parameters},
journal = {Physica Scripta},
year = {2026},
volume = {101},
number = {26},
pages = {265909},
doi = {10.1088/1402-4896/ae7edf}
}
EUVIMED