Buffering performance evaluation of Halbach-array electromagnetic collision beams in automotive crashes
Physica Scripta · 19.06.2026 · 101 (24) · 245504
DOI: 10.1088/1402-4896/ae7845 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 16.06.2026. Verfasst von Yi Wu und 7 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Gefördert von: Youth Project of Shandong Provincial Natural Science Foundation, Youth Project of the National Natural Science Foundation of China, Taishan Scholar Project of Shandong Province.
Abstract (Originalsprache)
To address the irreversible plastic deformation of conventional crash beams under low-speed collisions, this study introduces a Halbach-enhanced electromagnetic damping mechanism into an automotive impact protection system. In many eddy current damper (ECD) applications, the damping force is often simplified as a quasi-steady response governed by the instantaneous velocity. However, this simplification may be inadequate for millisecond-scale impacts, where velocity, displacement, and magnetic diffusion change rapidly. Therefore, this study proposes a reusable electromagnetic crash beam integrated with a Halbach array ECD and investigates its transient electromagnetic–structural coupling mechanism. A coupled finite element model is developed and validated by comparing the simulated damping force with impact-test measurements at different drop heights. The results show that the proposed system provides effective non-contact damping under impact loading. At 20 km h −1 , the peak damping force is 25.1% higher than that of a conventional electromagnetic damping system, and the energy absorption efficiency under frontal impact is improved by 17.19%. More importantly, the damping response is not a simple quasi-steady process. Owing to the time-lag effect of eddy-current diffusion, the damping force–velocity relationship forms a pronounced hysteresis loop between the acceleration and deceleration stages. Parametric analysis shows that, within the investigated range, the air gap has a stronger effect on energy dissipation than the inner tube thickness, while the improvement obtained by increasing the inner-tube thickness tends to saturate. The peak principal stress of the critical magnet is 39.54 MPa, which is below the tensile strength of the material. The higher-velocity assessment shows that the electromagnetic crash beam reaches its structural applicability limit near 45 km h −1 , beyond which yielding and local buckling will occur. These results demonstrate that the proposed Halbach array electromagnetic crash beam can provide both non-contact energy dissipation and structural response control for reusable low-speed crash protection.
Förderung
- Youth Project of Shandong Provincial Natural Science Foundation
- Youth Project of the National Natural Science Foundation of China
- Taishan Scholar Project of Shandong Province
Zitieren
APA
Wu, Y., Li, Z., Tao, X., Zhang, B., Chen, Y., Wei, Z., Yang, P., & Mu, Z. (2026). Buffering performance evaluation of Halbach-array electromagnetic collision beams in automotive crashes. Physica Scripta, 101(24), 245504. https://doi.org/10.1088/1402-4896/ae7845
Vancouver
Wu Y, Li Z, Tao X, Zhang B, Chen Y, Wei Z, et al. Buffering performance evaluation of Halbach-array electromagnetic collision beams in automotive crashes. Physica Scripta. 2026;101(24):245504. doi:10.1088/1402-4896/ae7845
BibTeX
@article{Wu2026,
author = {Wu, Yi and Li, Zixuan and Tao, Xuexuan and Zhang, Boquan and Chen, Yundong and Wei, Zhiyi and Yang, Panpan and Mu, Zonggao},
title = {Buffering performance evaluation of Halbach-array electromagnetic collision beams in automotive crashes},
journal = {Physica Scripta},
year = {2026},
volume = {101},
number = {24},
pages = {245504},
doi = {10.1088/1402-4896/ae7845}
}
EUVIMED