Analysis of tertiary creep behavior and prediction of creep strains using θ -projection model at different temperatures of 304HCu SS
Physica Scripta · 15.05.2026 · 101 (19) · 195914
DOI: 10.1088/1402-4896/ae6692 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 13.05.2026. Verfasst von K C Sahoo. Die Arbeit nennt 28 Literaturangaben.
Abstract (Originalsprache)
Tertiary creep deformation behavior of 304HCu austenitic stainless steel (304HCu SS) was analyzed at 923–1023 K under stresses of 100–240 MPa. With decrease in temperature, onset of tertiary creep was delayed, reflecting improved microstructural stability against creep damage mechanisms such as grain boundary cavitation and void coalescence. An evaluation of the tertiary creep behavior was performed using the corresponding relationship ε = ε 0 + ε ̇ s t + ε 3 exp p t − t t . An increase in temperature was observed to boost a higher acceleration rate of the tertiary parameter ‘p’. Correlations of (i) p with the steady-state creep rate and the duration of tertiary deformation, and (ii) the final creep rate ε ̇ f with the steady-state creep rate, indicated that a first-order reaction rate theory governs both steady-state and tertiary creep regimes in 304HCu SS. A master tertiary creep curve was established for different temperatures which was found good at relatively lower strain and significant deviation at higher strains might be due to operation of several damage mechanics at different stress and temperatures. The reduction in the tertiary parameter p with increasing temperature, along with a lower steady-state creep rate and longer rupture life, is attributed to the increase in microstructural stability of 304HCu SS. The creep behavior of 304HCu SS was further modeled using the θ -projection equation, ε c = θ 1 1 − e − θ 2 t + θ 3 e θ 4 t − 1 and validated against experimental data. The results confirmed that the θ -projection model reliably predicts creep strain for relatively low rupture time data (subjected to higher stresses) over the investigated stress and temperature ranges.
Zitieren
APA
Sahoo, K. C. (2026). Analysis of tertiary creep behavior and prediction of creep strains using θ -projection model at different temperatures of 304HCu SS. Physica Scripta, 101(19), 195914. https://doi.org/10.1088/1402-4896/ae6692
Vancouver
Sahoo KC. Analysis of tertiary creep behavior and prediction of creep strains using θ -projection model at different temperatures of 304HCu SS. Physica Scripta. 2026;101(19):195914. doi:10.1088/1402-4896/ae6692
BibTeX
@article{Sahoo2026,
author = {Sahoo, K C},
title = {Analysis of tertiary creep behavior and prediction of creep strains using θ -projection model at different temperatures of 304HCu SS},
journal = {Physica Scripta},
year = {2026},
volume = {101},
number = {19},
pages = {195914},
doi = {10.1088/1402-4896/ae6692}
}
EUVIMED