EUVIMEDEUVIMED entdecken
Crossref

Model simulation and experimental verification of a new quench detection sensor utilizing second generation high temperature superconductor coated tape

Chao Huang, Jindou Liu, Jiaxin Zuo

Physica Scripta · 24.04.2026 · 101 (16) · 165603

DOI: 10.1088/1402-4896/ae5f50 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 23.04.2026. Verfasst von Chao Huang und 2 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: State Key Laboratory of Advanced Electromagnetic Technology, Innovation Programs of Southwestern Institute of Physics.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the widespread application of second-generation high-temperature superconductors (HTS), the importance of quench detection has become increasingly prominent. To address the challenge of quench detection in HTS operating under strong magnetic fields above 15 T and temperatures above 40 K without reducing the stability margin of HTS, this paper innovatively proposes a HTS coated (HC) quench sensor based on second-generation HTS tape. By implementing a structure without shunt metal, rapid detection of quench voltage is achieved. To validate this innovative concept, a thermoelectric coupling model for quench detection integrating stabilizers, transmission tape, and sensor is constructed. To verify the correctness of the simulation model and assess the practical effectiveness of the sensor, a quench sensor is ingeniously and firstly fabricated using existing HTS tape structure, and a quench detection experiment is conducted with a transmission current of 70 A at a critical current of 69 A. The simulation results show that the detection voltage (Vd) reaches 0.1 V, at 27.5 ms, after the hotspot temperature reaches 90 K, with corresponding hot spot temperatures of 90.13 K. The experimental results indicate that Vd reaches 0.1 V at 76.3 ms. It can be potentially considered that the sensor can detect quench signals of 0.1–0.2 V within 100 ms, with the final maximum hot spot temperatures in both simulation and experiment being less than 122 K. The mutual validation of simulation and experiment confirms the mechanism’s correctness and demonstrates the HC quench sensor’s effect (to be the first of its kind), offering substantial support for HTS’s commercialization.

Förderung

  • State Key Laboratory of Advanced Electromagnetic Technology
  • Innovation Programs of Southwestern Institute of Physics

Zitieren

APA

Huang, C., Liu, J., & Zuo, J. (2026). Model simulation and experimental verification of a new quench detection sensor utilizing second generation high temperature superconductor coated tape. Physica Scripta, 101(16), 165603. https://doi.org/10.1088/1402-4896/ae5f50

Vancouver

Huang C, Liu J, Zuo J. Model simulation and experimental verification of a new quench detection sensor utilizing second generation high temperature superconductor coated tape. Physica Scripta. 2026;101(16):165603. doi:10.1088/1402-4896/ae5f50

BibTeX
@article{Huang2026,
  author = {Huang, Chao and Liu, Jindou and Zuo, Jiaxin},
  title = {Model simulation and experimental verification of a new quench detection sensor utilizing second generation high temperature superconductor coated tape},
  journal = {Physica Scripta},
  year = {2026},
  volume = {101},
  number = {16},
  pages = {165603},
  doi = {10.1088/1402-4896/ae5f50}
}
Kostenlos starten →