Multifunctional BN–carbon/epoxy hybrid composites: integrated structural, microwave, and thermal characterization toward energy efficient microwave applications
Physica Scripta · 24.04.2026 · 101 (16) · 165913
DOI: 10.1088/1402-4896/ae5f4e ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 23.04.2026. Verfasst von Abeer Farouk Al-Attar und 2 weiteren Autor:innen. Die Arbeit nennt 93 Literaturangaben.
Abstract (Originalsprache)
The recent development with modern microwave based technologies has massive electromagnetic (EM) pollution, which reflects serious concerns about public safety with the environmental impact from these electronic devices. As a result of these challenges, environmentally hybrid composites were prepared with hexagonal boron nitride (h-BN) with recycled chopped woven carbon fabric (CWCF) reinforced epoxy resin, produced through a low-energy (hand lay-up) technique, and examined their structural, thermal, and electromagnetic characteristics. The morphology observation revealed a well-distributed hybrid structure and upgraded interfacial bonding with embedded h-BN with CWCF, especially with CWCF-rich samples. The physical incorporation demonstrated no modification with chemical structure for all prepared samples with hybrid fillers (HFs) into the epoxy in FTIR results. Furthermore, the enhancement of the heat conduction of CWCF-rich samples was confirmed by improved thermal analysis by Hot Disk calculations. While electromagnetic performance was analyzed by LCR, it was found that samples with HF materials and under applied voltages significantly affect the permittivity, dielectric loss, electrical conductivity, and shielding behavior. Finally, conductive loss mechanisms and signaling dominance dipolar were with at 1.0 V, ε ″ ∼450 (high dielectric imaginary), further increased up to at 2.0 V with the biggest value of dielectric loss (tan δ ≈ 8.7) the HCM 3 (lowest CWCF %). It was seen a typical impedance match was (Z in ≈ 1 Ω) for maximum absorption with HCM 1 (h-BN-rich). AC conductivity increased with frequency, with HCM 3 still having the most stable values (∼0.03 S m −1 ). Optimal values were with shielding effectiveness at (1.0–1.5) V with HCM 1 , whereas HCM 3 surpassed at a higher bias (2.0 V). It was determined that these new prepared hybrid composites demonstrated the benefits of tunable EM attenuation, effective heat management, and an eco-friendly profile with h-BNCWCF/epoxy HCMs high-performance, environment-friendly alternatives to current metal-based shielding material, with a possibility of future leadership in EMI shielding and radar absorbers, and energy-saving microwave devices.
Zitieren
APA
Al-Attar, A. F., Abbas, H. F., & Abbas, A. F. (2026). Multifunctional BN–carbon/epoxy hybrid composites: integrated structural, microwave, and thermal characterization toward energy efficient microwave applications. Physica Scripta, 101(16), 165913. https://doi.org/10.1088/1402-4896/ae5f4e
Vancouver
Al-Attar AF, Abbas HF, Abbas AF. Multifunctional BN–carbon/epoxy hybrid composites: integrated structural, microwave, and thermal characterization toward energy efficient microwave applications. Physica Scripta. 2026;101(16):165913. doi:10.1088/1402-4896/ae5f4e
BibTeX
@article{AlAttar2026,
author = {Al-Attar, Abeer Farouk and Abbas, Huda Farouk and Abbas, Ahmad Farouk},
title = {Multifunctional BN–carbon/epoxy hybrid composites: integrated structural, microwave, and thermal characterization toward energy efficient microwave applications},
journal = {Physica Scripta},
year = {2026},
volume = {101},
number = {16},
pages = {165913},
doi = {10.1088/1402-4896/ae5f4e}
}
EUVIMED