EUVIMEDEUVIMED entdecken
Crossref

Numerical analysis of arc characteristics in advanced high-frequency multi-pulse GTAW

Yue Yu, Di Wu, Lingli Li, Hongyan Zhao, Hongxiao Li, Shujun Chen

Physica Scripta · 27.03.2026 · 101 (12) · 125602

DOI: 10.1088/1402-4896/ae5002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 24.03.2026. Verfasst von Yue Yu und 5 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Gefördert von: Fundamental Research Funds for the Beijing Municipal Universities, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-frequency pulsed Gas Tungsten Arc Welding (GTAW) break critical limitations in conventional welding by enabling independent control of weld penetration and width which is essential for thin-walled structures and heat-sensitive materials. Our previous studies indicated that high-frequency pulsed GTAW (10 kHz–40 kHz) exhibits significant advantages over conventional continuous arc welding, particularly in arc constriction, stability and weld quality control. However, the underlying physical mechanisms governing arc behavior under high-frequency pulsing, especially the waveform of pulse input, remained unclear. To reveal these mechanisms, in this study, based on the assumptions of magneto-hydrodynamics and local thermal equilibrium, a transient two-dimensional axisymmetric numerical model of high-frequency multi-pulse GTAW was established to explain how pulse parameters affect arc temperature distribution, electromagnetic forces, and energy transfer. The numerical analysis results revealed that increasing the pulse frequency primarily leads to an increase in the average temperature of the high-temperature region of the arc, a reduction in the overall area of the arc, and has a greater impact on the weld penetration. Increasing the number of pulses in a single cycle mainly constricts the overall arc, increases the area and proportion of the high-temperature region, and has a more prominent impact on the weld width. Finally, welding experiments conducted on Q235 steel show high consistence with the simulation. This mechanistic understanding enables precise design of arc characteristics through dual-parameter control (pulse frequency and pulse number) to meet diverse operational requirements.

Förderung

  • Fundamental Research Funds for the Beijing Municipal Universities
  • National Key Research and Development Program of China

Zitieren

APA

Yu, Y., Wu, D., Li, L., Zhao, H., Li, H., & Chen, S. (2026). Numerical analysis of arc characteristics in advanced high-frequency multi-pulse GTAW. Physica Scripta, 101(12), 125602. https://doi.org/10.1088/1402-4896/ae5002

Vancouver

Yu Y, Wu D, Li L, Zhao H, Li H, Chen S. Numerical analysis of arc characteristics in advanced high-frequency multi-pulse GTAW. Physica Scripta. 2026;101(12):125602. doi:10.1088/1402-4896/ae5002

BibTeX
@article{Yu2026,
  author = {Yu, Yue and Wu, Di and Li, Lingli and Zhao, Hongyan and Li, Hongxiao and Chen, Shujun},
  title = {Numerical analysis of arc characteristics in advanced high-frequency multi-pulse GTAW},
  journal = {Physica Scripta},
  year = {2026},
  volume = {101},
  number = {12},
  pages = {125602},
  doi = {10.1088/1402-4896/ae5002}
}
Kostenlos starten →