Thermal cycle-induced phase stability of nanocrystalline tetragonal zirconia powders synthesized from zircon sand
Physica Scripta · 13.03.2026 · 101 (10) · 105916
DOI: 10.1088/1402-4896/ae4ae0 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 10.03.2026. Verfasst von Adam Aswin Usman und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Institut Teknologi Sepuluh Nopember.
Abstract (Originalsprache)
This study investigates the phase stability of nanocrystalline tetragonal zirconia (t-ZrO 2 ) synthesized from natural zircon sand from Central Kalimantan, Indonesia, under prolonged thermal cycling. Zirconia powders were produced via alkali fusion–precipitation, calcined at 800–1000 °C for 3 h, and subjected to repeated heat–hold–cool cycling at temperatures up to 1000 °C for cumulative durations of up to 50 h. Phase stability was assessed by room-temperature x-ray diffraction after each cycling interval. Complete retention of the tetragonal phase was observed under all investigated conditions, with no tetragonal-to-monoclinic (t→m) transformation. TEM and SAED confirm persistent tetragonal symmetry and controlled crystallite coarsening from ∼6 nm after calcination to ∼24 nm after thermal cycling, remaining below the critical size for martensitic transformation. In contrast, zirconia derived from commercial ZrCl 4 exhibits a pronounced t→m transformation (∼62 wt%) under identical conditions, while 3 mol% Y 2 O 3 -stabilized zirconia remains fully tetragonal. STEM–EDS analysis of the post-calcined ZA10C sample indicates Si at ∼10.5 at% with a non-uniform distribution relative to zirconia crystallites, suggesting a tendency for Si to be associated with intercrystallite-related regions rather than uniform lattice incorporation. These results show that phase stability in zircon sand-derived t-ZrO 2 is governed by microstructural and kinetic stabilization, likely involving impurity-assisted suppression of crystallite coarsening, rather than classical dopant-induced lattice substitution. This work demonstrates the potential of zircon sand as a sustainable, cost-effective precursor for thermally stable, dopant-free t-ZrO 2 for high-temperature ceramic applications.
Förderung
- Institut Teknologi Sepuluh Nopember
Zitieren
APA
Usman, A. A., Misdayanti, Akhmad, A. R., Sudiro, T., Silvia, L., Pratapa, S., & Astuti, F. (2026). Thermal cycle-induced phase stability of nanocrystalline tetragonal zirconia powders synthesized from zircon sand. Physica Scripta, 101(10), 105916. https://doi.org/10.1088/1402-4896/ae4ae0
Vancouver
Usman AA, Misdayanti, Akhmad AR, Sudiro T, Silvia L, Pratapa S, et al. Thermal cycle-induced phase stability of nanocrystalline tetragonal zirconia powders synthesized from zircon sand. Physica Scripta. 2026;101(10):105916. doi:10.1088/1402-4896/ae4ae0
BibTeX
@article{Usman2026,
author = {Usman, Adam Aswin and Misdayanti and Akhmad, Anugrah Rezki and Sudiro, Toto and Silvia, Linda and Pratapa, Suminar and Astuti, Fahmi},
title = {Thermal cycle-induced phase stability of nanocrystalline tetragonal zirconia powders synthesized from zircon sand},
journal = {Physica Scripta},
year = {2026},
volume = {101},
number = {10},
pages = {105916},
doi = {10.1088/1402-4896/ae4ae0}
}
EUVIMED