Structural vibration suppression for all-clamped plate with inertial actuator using a model-assisted ESO-based dynamic sliding mode controller
Physica Scripta · 01.12.2025 · 100 (12) · 125202
DOI: 10.1088/1402-4896/ae221e ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 01.12.2025. Verfasst von Junhui Gu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: Postgraduate Research & Practice Innovation Program of Jiangsu Province.
Abstract (Originalsprache)
This paper investigates the vibration suppression of an all-clamped plate based on an electromagnetic inertial actuator. A dynamic sliding mode controller combined with a model-assisted extended state observer (DSMC+MAESO) is developed to address strong electromechanical coupling, external disturbances, and nonlinearities of the vibration system. An electromechanical coupling dynamic model is established to capture the intrinsic nonlinearities induced by the inertial actuator’s electromagnetic force called control force. The model-assisted extended state observer (MAESO), employing the experimental setup, is developed to more accurately estimate the system states and total disturbances including strong coupling, nonlinearity and external disturbances, while avoiding bandwidth increase. Considering the influence of total disturbances on the all-clamped plate, a disturbance-compensated dynamic sliding surface is designed by incorporating the disturbance estimation from MAESO. The dynamic sliding mode controller (DSMC) optimizes the control voltage and reduces the high-frequency chattering phenomenon of conventional sliding mode control, thereby protecting the inertial actuator. The experiments are carried out on the basis of the National Instruments Peripheral Component Interconnect Express 6343 (NI PCIe-6343) acquisition card. Experimental results demonstrated that the proposed DSMC+MAESO method significantly suppressed vibration of the all-clamped plate, reducing the amplitude from 15.1 dB to 0.2 dB. This performance clearly outperformed dynamic sliding mode controller combined with an extended state observer (DSMC+ESO) and sliding mode controller combined with an extended state observer(SMC+ESO), confirming the superiority and practical applicability of the proposed method for vibration control in such structures.
Förderung
- Postgraduate Research & Practice Innovation Program of Jiangsu Province
Zitieren
APA
Gu, J., Yang, J., Chen, D., Amin, M. A., & Li, S. (2025). Structural vibration suppression for all-clamped plate with inertial actuator using a model-assisted ESO-based dynamic sliding mode controller. Physica Scripta, 100(12), 125202. https://doi.org/10.1088/1402-4896/ae221e
Vancouver
Gu J, Yang J, Chen D, Amin MA, Li S. Structural vibration suppression for all-clamped plate with inertial actuator using a model-assisted ESO-based dynamic sliding mode controller. Physica Scripta. 2025;100(12):125202. doi:10.1088/1402-4896/ae221e
BibTeX
@article{Gu2025,
author = {Gu, Junhui and Yang, Jiawei and Chen, Donglei and Amin, Md Al and Li, Shengquan},
title = {Structural vibration suppression for all-clamped plate with inertial actuator using a model-assisted ESO-based dynamic sliding mode controller},
journal = {Physica Scripta},
year = {2025},
volume = {100},
number = {12},
pages = {125202},
doi = {10.1088/1402-4896/ae221e}
}
EUVIMED