EUVIMEDEUVIMED entdecken
Crossref

Investigation on low-frequency broadband perfect sound absorption metastructure based on area coupling effect

Liangfei Ding, Li Tang, Baozhu Cheng, Longxu Wang, Rui Li, Hong Hou

Physica Scripta · 01.11.2025 · 100 (11) · 115943

DOI: 10.1088/1402-4896/ae1d2f ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 19.11.2025. Verfasst von Liangfei Ding und 5 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, Natural Science Foundation of Jiangsu Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To Address the issue of broadband perfect sound absorption failure caused by area coupling effects in acoustic metamaterials, particularly during transitions from narrowband to broadband, this study proposes a novel structure termed ‘bending channel Helmholtz coupled sound absorber’ (BCSA), which considers the area coupling effect. First, theoretical models for the bending channels and Helmholtz resonator (HR) structures are developed using the thermal viscoelastic equivalent theory. Finite element analysis is then employed to validate the accuracy of these models. Based on the aforementioned models, the influence of the geometric parameters of the HR and bending channels on acoustic absorption performance is systematically investigated. Considering both geometric parameter tuning and the area coupling effects among units, a theoretical model of the BCSA composed of multiple bending channels and HR units is constructed. An optimized design of a BCSA metastructure with a thickness of only 35 mm exhibits an absorption coefficient exceeding 0.8 within the frequency range of 288–365 Hz. Subsequently, the mechanisms underlying the high-performance low-frequency broadband absorption of the BCSA metastructure are analyzed using finite element simulations, confirming the validity of the theoretical model. Finally, a 35-mm-thick BCSA sample is fabricated using 3D printing . Impedance tube experiments demonstrate that the optimized BCSA attains an absorption coefficient above 0.8 across the frequency range of 294–364 Hz.Compared with existing bending channels or HR metamaterials, this study transforms the detrimental area coupling side effects into a design advantage. While traditional methods achieve bandwidth broadening by increasing the number or thickness of units, often causing impedance mismatches the BCSA leverages impedance increments generated by parallel non-ideal units to counterbalance each unit’s intrinsic loss. The study clarifies the role of area coupling in sound absorption, offering theoretical insights for mitigating excessive loss damage in multi-unit coupling and offering guidance for the design of low-frequency broadband perfect sound absorption metamaterials.

Förderung

  • China Postdoctoral Science Foundation
  • Natural Science Foundation of Jiangsu Province
  • National Natural Science Foundation of China
  • State Key Laboratory of Acoustics and Marine Information

Zitieren

APA

Ding, L., Tang, L., Cheng, B., Wang, L., Li, R., & Hou, H. (2025). Investigation on low-frequency broadband perfect sound absorption metastructure based on area coupling effect. Physica Scripta, 100(11), 115943. https://doi.org/10.1088/1402-4896/ae1d2f

Vancouver

Ding L, Tang L, Cheng B, Wang L, Li R, Hou H. Investigation on low-frequency broadband perfect sound absorption metastructure based on area coupling effect. Physica Scripta. 2025;100(11):115943. doi:10.1088/1402-4896/ae1d2f

BibTeX
@article{Ding2025,
  author = {Ding, Liangfei and Tang, Li and Cheng, Baozhu and Wang, Longxu and Li, Rui and Hou, Hong},
  title = {Investigation on low-frequency broadband perfect sound absorption metastructure based on area coupling effect},
  journal = {Physica Scripta},
  year = {2025},
  volume = {100},
  number = {11},
  pages = {115943},
  doi = {10.1088/1402-4896/ae1d2f}
}
Kostenlos starten →