Numerical performance analysis of dielectric grating integrated mercury cadmium telluride long wavelength infrared photodetector
Physica Scripta · 01.11.2025 · 100 (11) · 115526
DOI: 10.1088/1402-4896/ae1d2a ↗Kurz gefasst
Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 24.11.2025. Verfasst von M A H Sojib und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Convergence Lab Initiative (CLI) funded by the U.S. Air Force.
Abstract (Originalsprache)
The quest for achieving high operating temperature (HOT) HgCdTe infrared detectors requires a thin absorbing layer to minimize dark current. However, this imposes a trade-off between carrier collection efficiency and absorption (i.e., responsivity). Particularly, the effect is predominant near the cutoff wavelength, where the material intrinsic absorption coefficient is relatively small, leading to soft spectral roll-off. To address the trade-off, the absorber thickness has been optimized based on the total photogenerated current normalized to the corresponding dark current density. Besides, we propose a 2D dielectric grating integrated Auger suppressed detector scheme and numerically analyze it in the long wavelength range ( λ ∈ 8 , 12 μ m ) at T = 205 K to address the soft spectral roll-off. The scheme increases the lateral optical path within a subwavelength-thick (t MCT = 3 μm) HgCdTe absorbing layer, boosting absorbed photon density. In response, integrated mean responsivity improves from ∼1.4 A W −1 (without grating) to ∼3.8 A W −1 and ∼5 A W −1 with a grating period of 4 μm and 6 μm, respectively, within the wavelength range of 10 μm to 12 μm. Consequently, detector detectivity increases from ∼8.4 × 10 8 cm√Hz W −1 (without grating) to ∼4.2 × 10 9 cm√Hz W −1 (with grating) at λ = 10.9 μm. The ability to improve detector key optical performances, predominantly near the cutoff wavelength, is promising for next-generation HgCdTe HOT infrared detectors.
Förderung
- Convergence Lab Initiative (CLI) funded by the U.S. Air Force
Zitieren
APA
Sojib, M. A. H., Sheremet, V., Avrutin, V., Özgür, Ü., & Dhar, N. K. (2025). Numerical performance analysis of dielectric grating integrated mercury cadmium telluride long wavelength infrared photodetector. Physica Scripta, 100(11), 115526. https://doi.org/10.1088/1402-4896/ae1d2a
Vancouver
Sojib MAH, Sheremet V, Avrutin V, Özgür Ü, Dhar NK. Numerical performance analysis of dielectric grating integrated mercury cadmium telluride long wavelength infrared photodetector. Physica Scripta. 2025;100(11):115526. doi:10.1088/1402-4896/ae1d2a
BibTeX
@article{Sojib2025,
author = {Sojib, M A H and Sheremet, V and Avrutin, V and Özgür, Ü and Dhar, N K},
title = {Numerical performance analysis of dielectric grating integrated mercury cadmium telluride long wavelength infrared photodetector},
journal = {Physica Scripta},
year = {2025},
volume = {100},
number = {11},
pages = {115526},
doi = {10.1088/1402-4896/ae1d2a}
}
EUVIMED