EUVIMEDEUVIMED entdecken
Crossref

Exploring the role of substrate temperature in tailoring the gas sensing performance of sputter-deposited WO 3 films

Santosh Kumar, Akula Umamaheswara Rao, Amit Kumar Chawla, Ratnesh K Pandey

Physica Scripta · 01.08.2025 · 100 (8) · 085965

DOI: 10.1088/1402-4896/adf6ef ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 13.08.2025. Verfasst von Santosh Kumar und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to the increasing demand for gas sensors, particularly in the oil and gas industry for accurate detection and safe operation, the present study is centered on the synthesis process of WO 3 thin-films, as WO 3 is a promising material for sensitive gas detection. Using pulsed DC magnetron sputtering, WO 3 films were coated on silicon (100) and ITO-coated glass substrates at different substrate temperatures varying from room temperature to 800 °C in 200 °C intervals. The XRD pattern revealed that increasing the substrate temperature beyond 400 °C led to a phase transformation from monoclinic to hexagonal WO 3 . The surface morphological studies using FESEM showed a transition from a fine granular structure at room temperature to larger grains at higher temperatures, reflecting enhanced grain growth. Gas sensing measurements were conducted at 200 °C in a static test chamber, demonstrating that the sensitivity is strongly depending on the substrate temperature and corresponding microstructure. Gas sensing performance was evaluated for gases like hydrogen (H 2 ), methane (CH 4 ), and carbon monoxide (CO). The films coated at 800 °C showed the highest sensitivity to CH 4 , with a rapid response time of 20 s and a recovery time of 25 s. Notably, the thin film sensor demonstrated excellent repeatable sensitivity to 25 ppm of CH 4 . These findings emphasize the critical role of substrate temperature in tailoring the phase composition and grain structure of WO 3 thin films for CH 4 sensing applications.

Zitieren

APA

Kumar, S., Rao, A. U., Chawla, A. K., & Pandey, R. K. (2025). Exploring the role of substrate temperature in tailoring the gas sensing performance of sputter-deposited WO 3 films. Physica Scripta, 100(8), 085965. https://doi.org/10.1088/1402-4896/adf6ef

Vancouver

Kumar S, Rao AU, Chawla AK, Pandey RK. Exploring the role of substrate temperature in tailoring the gas sensing performance of sputter-deposited WO 3 films. Physica Scripta. 2025;100(8):085965. doi:10.1088/1402-4896/adf6ef

BibTeX
@article{Kumar2025,
  author = {Kumar, Santosh and Rao, Akula Umamaheswara and Chawla, Amit Kumar and Pandey, Ratnesh K},
  title = {Exploring the role of substrate temperature in tailoring the gas sensing performance of sputter-deposited WO 3 films},
  journal = {Physica Scripta},
  year = {2025},
  volume = {100},
  number = {8},
  pages = {085965},
  doi = {10.1088/1402-4896/adf6ef}
}
Kostenlos starten →