EUVIMEDEUVIMED entdecken
Crossref

Stochastic Resonance with coupled quad-stable driven by dual-input signals for bearing fault detection

Lifang He, Jiachen Hou, Xiaoxiao Huang, Zihan Cao

Physica Scripta · 01.04.2025 · 100 (4) · 045238

DOI: 10.1088/1402-4896/adc040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 25.03.2025. Verfasst von Lifang He und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Chongqing Natural Science Foundation General Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Stochastic resonance is an effective technique for diagnosing early signals of bearing faults. In this article, a novel piecewise quad-stable stochastic resonance system (PQSR) is proposed. The output saturation characteristic of classical quad-stable stochastic resonance system (CQSR) is solved. Based on the PQSR system, two combination methods are studied, namely a two-dimensional coupled piecewise quad-stable stochastic resonance system (TDPQSR) and a dual-input driven signal two-dimensional coupled piecewise quad-stable stochastic resonance system (DTDPQSR). Firstly, the steady-state probability density (SPD) of DTDPQSR is derived from Fokker-Planck equation under adiabatic approximation theory, and the influence of system parameters on it is analyzed. Then, the mean first passage time (MFPT) and spectral amplification (SA) of particles are derived, and the effects of various system parameters on these quantities are discussed. In addition, Quantum Genetic Algorithm (QGA) is chosen to optimize the system parameters, and fourth-order Runge–Kutta numerical simulation is carried out with signal-to-noise ratio (SNR) as fitness function and signal-to-noise ratio improvement (SNRI) as evaluation index to compare the performance of the PQSR, TDPQSR, and DTDPQSR. The three systems are applied to the periodic signal and the output results are compared. The experimental results show that the DTDPQSR system has a larger SNRI peak and output amplitude at a characteristic frequency, proving that the dual-input signal coupling system can better induce stochastic resonance. Finally, the three systems were individually applied to the fault detection of three different types of bearings, with the system parameters optimized using the QGA. The experimental results demonstrated that the DTDPQSR system outperformed the other two systems in fault detection, thereby highlighting its considerable potential for practical engineering applications.

Förderung

  • Chongqing Natural Science Foundation General Project

Zitieren

APA

He, L., Hou, J., Huang, X., & Cao, Z. (2025). Stochastic Resonance with coupled quad-stable driven by dual-input signals for bearing fault detection. Physica Scripta, 100(4), 045238. https://doi.org/10.1088/1402-4896/adc040

Vancouver

He L, Hou J, Huang X, Cao Z. Stochastic Resonance with coupled quad-stable driven by dual-input signals for bearing fault detection. Physica Scripta. 2025;100(4):045238. doi:10.1088/1402-4896/adc040

BibTeX
@article{He2025,
  author = {He, Lifang and Hou, Jiachen and Huang, Xiaoxiao and Cao, Zihan},
  title = {Stochastic Resonance with coupled quad-stable driven by dual-input signals for bearing fault detection},
  journal = {Physica Scripta},
  year = {2025},
  volume = {100},
  number = {4},
  pages = {045238},
  doi = {10.1088/1402-4896/adc040}
}
Kostenlos starten →