Mechanism and mitigation of anomalous V – I characteristics in I c measurements of fully filamentised REBCO tapes
Superconductor Science and Technology · 01.11.2026 · 39 (11) · 115007
DOI: 10.1088/1361-6668/aeb76e ↗Kurz gefasst
Fachartikel in der Zeitschrift Superconductor Science and Technology, online erschienen am 09.11.2026. Verfasst von Xiaohui Lin und 10 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Gefördert von: Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China, Shanghai Municipal Commission of Science and Technology, National Natural Science Foundation of China.
Abstract (Originalsprache)
Critical-current measurements of fully filamentised REBCO coated conductors using the standard four-probe method frequently produce anomalous, poorly reproducible V – I characteristics. These include premature resistive signals and step-like voltage transitions that preclude reliable determination of I c and the n -value. By combining transport experiments with a nonlinear equivalent circuit model, we show that these anomalies originate from finite inter-filament resistance. The resistance disrupts the quasi-equipotential condition across the tape width, driving non-uniform current sharing among filaments in a pattern governed by the arrangement of current and voltage leads. On this basis, we develop two measurement strategies compatible with industrial reel-to-reel processing, neither of which requires the unfilamentised end margins used in laboratory practice. The controlled sequential transition (CST) method induces a deterministic filament transition sequence, generating step-rich V – I curves from which filament-resolved I c values are extracted through model-driven regression with approximately 5% consistency under reversal of the current injection direction. The pre-distributed current (PDC) method suppresses redistribution by apportioning the transport current according to the expected I c of each filament, yielding smooth, conventional V – I curves. Across all ten nominally identical samples at 77 K in self-field, the PDC method recovers I c within approximately ±1.5% of the reference with voltage taps placeable on any filament. Direct readout from the CST method systematically overestimates the n -value, by +70% to +246% across the ten samples (mean +120%)—a bias that the analytical model captures semi-quantitatively. We recommend the PDC method for critical-current calibration at the tape ends and the CST method for filament-level defect diagnostics during conductor development. The results establish a measurement framework for multifilamentary REBCO tapes and illustrate a general metrological principle: when a superconducting layer is subdivided into elements connected by finite inter-element resistance, strategies that explicitly account for transverse current paths must replace the quasi-equipotential assumption of standard four-probe protocols.
Förderung
- Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China
- Shanghai Municipal Commission of Science and Technology
- National Natural Science Foundation of China
- Gansu Provincial Natural Science Foundation Basic Research Innovation Group
Zitieren
APA
Lin, X., Zhang, J., Chen, S., Wu, J., Huang, Y., Zhang, C., Cheng, Y., Sun, J., Zhu, J., Guan, M., & Wang, X. (2026). Mechanism and mitigation of anomalous V – I characteristics in I c measurements of fully filamentised REBCO tapes. Superconductor Science and Technology, 39(11), 115007. https://doi.org/10.1088/1361-6668/aeb76e
Vancouver
Lin X, Zhang J, Chen S, Wu J, Huang Y, Zhang C, et al. Mechanism and mitigation of anomalous V – I characteristics in I c measurements of fully filamentised REBCO tapes. Superconductor Science and Technology. 2026;39(11):115007. doi:10.1088/1361-6668/aeb76e
BibTeX
@article{Lin2026,
author = {Lin, Xiaohui and Zhang, Junhao and Chen, Sikan and Wu, Jicheng and Huang, Ye and Zhang, Chao and Cheng, Yanan and Sun, Junjie and Zhu, Jiamin and Guan, Mingzhi and Wang, Xingzhe},
title = {Mechanism and mitigation of anomalous V – I characteristics in I c measurements of fully filamentised REBCO tapes},
journal = {Superconductor Science and Technology},
year = {2026},
volume = {39},
number = {11},
pages = {115007},
doi = {10.1088/1361-6668/aeb76e}
}
EUVIMED