EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

MOSFET-based HTS flux pump

Róbert Jurčo, Anna Vaskuri, Benoit Curé, Alexey Dudarev, Matthias Mentink

Superconductor Science and Technology · 01.11.2023 · 36 (11) · 115025

DOI: 10.1088/1361-6668/acfbfc ↗

Kurz gefasst

Fachartikel in der Zeitschrift Superconductor Science and Technology, online erschienen am 09.10.2023. Verfasst von Róbert Jurčo und 4 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CERN EP R&D.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We have developed a high-temperature superconducting (HTS) flux pump using high-power metal-oxide-semiconductor field-effect transistors (MOSFETs) for switching. For its primary coil, two commercial transformers are utilized, each consisting of two copper coils wound on a single iron core, which enables changing the load current over primary current ratio (101 or 194) between the primary and secondary coils. Full-wave rectification is achieved with two half-wave secondary circuits, each of them having six HTS one-turn coils to lower the resistance. Each secondary coil is composed out of nickel-reinforced BSCCO tapes, where 12 MOSFETs have been soldered in parallel straight to the tapes and controlled with analog electronics. Secondary coils are clamped to custom-made copper-stabilized HTS current leads. A support structure for keeping the HTS coils in place was 3D-printed using cryogenic-compatible composite material PETG-CF20. Resistances of the two secondary circuits were measured to be 4 μ Ω and 7 μ Ω at 77 K with a total critical current of 980 A. We successfully ramped up a 50 µ H Conductor on Round Core solenoid at 77 K using our HTS flux pump with 50 Hz AC voltage source. We achieved a maximal load current of 900 A and exceeded the 715 A critical current of the solenoid. During the thermal runaway of the magnet, the increased load voltage limits the maximum load current supplied by the flux pump.

Förderung

  • CERN EP R&D

Zitieren

APA

Jurčo, R., Vaskuri, A., Curé, B., Dudarev, A., & Mentink, M. (2023). MOSFET-based HTS flux pump. Superconductor Science and Technology, 36(11), 115025. https://doi.org/10.1088/1361-6668/acfbfc

Vancouver

Jurčo R, Vaskuri A, Curé B, Dudarev A, Mentink M. MOSFET-based HTS flux pump. Superconductor Science and Technology. 2023;36(11):115025. doi:10.1088/1361-6668/acfbfc

BibTeX
@article{Juro2023,
  author = {Jurčo, Róbert and Vaskuri, Anna and Curé, Benoit and Dudarev, Alexey and Mentink, Matthias},
  title = {MOSFET-based HTS flux pump},
  journal = {Superconductor Science and Technology},
  year = {2023},
  volume = {36},
  number = {11},
  pages = {115025},
  doi = {10.1088/1361-6668/acfbfc}
}
Kostenlos starten →