EUVIMEDEUVIMED entdecken
Crossref

Mechanical metastructure with programmable compression-to-twist transformation

Antonio Ferreira Avila, Frederico Castro Magalhães

Smart Materials and Structures · 18.11.2026

DOI: 10.1088/1361-665x/aec3f4 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 18.11.2026. Verfasst von Antonio Ferreira Avila und 1 weiteren Autor:innen. Gefördert von: Conselho Nacional de Desenvolvimento Científico e Tecnológico, Air Force Office of Scientific Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the large-deformation behaviour and deformation kinematics of a novel Z-chiral mechanical metastructure subjected to compressive loading. The architecture combines the nonlinear response of thermoplastic polyurethane (TPU) with a tailored cellular geometry designed to sequentially activate two distinct deformation mechanisms. During the initial compression stage, curved and straight members undergo bending, hinge-like rotation, and buckling, followed by progressive densification. Subsequent contact between the deformed members activates a second mechanism characterized by angular rotation about an axis parallel to the compression direction, enabling large compressive strains and a distinctive compression-to-rotation response. The mechanical behaviour was characterized experimentally and through nonlinear finite element (FE) simulations using third-order Ogden and Yeoh hyperelastic constitutive models adjusted for two TPU materials with different stiffness levels. Both models successfully captured the main deformation mechanisms and overall unit-cell kinematics, while the Ogden formulation provided closer agreement with the experimental force–displacement response. Nevertheless, both models underestimated the reaction forces at large strains and overpredicted the displacement required for complete densification, delaying the predicted transition to contact-dominated deformation. These discrepancies indicate limitations in reproducing the high-strain material response. The results show that the global deformation sequence is governed predominantly by geometric nonlinearities and contact interactions, whereas the constitutive formulation has a greater influence on the predicted force magnitude and densification behaviour. The findings highlight the importance of evaluating deformation kinematics alongside force–displacement response when validating constitutive models for highly deformable architected materials and demonstrate the potential of Z-chiral architectures for mechanically programmable compression-induced rotational transformations.

Förderung

  • Conselho Nacional de Desenvolvimento Científico e Tecnológico
  • Air Force Office of Scientific Research

Zitieren

APA

Avila, A. F., & Magalhães, F. C. (2026). Mechanical metastructure with programmable compression-to-twist transformation. Smart Materials and Structures. https://doi.org/10.1088/1361-665x/aec3f4

Vancouver

Avila AF, Magalhães FC. Mechanical metastructure with programmable compression-to-twist transformation. Smart Materials and Structures. 2026. doi:10.1088/1361-665x/aec3f4

BibTeX
@article{Avila2026,
  author = {Avila, Antonio Ferreira and Magalhães, Frederico Castro},
  title = {Mechanical metastructure with programmable compression-to-twist transformation},
  journal = {Smart Materials and Structures},
  year = {2026},
  doi = {10.1088/1361-665x/aec3f4}
}
Kostenlos starten →