EUVIMEDEUVIMED entdecken
Crossref

Design and optimization of gecko-inspired robotic end-effector driven by a rigid-compliant-rigid transmission chain

maozheng song, Jing Cui, Yihao zhang, 旭 陈, zhang xiaodong, Zhongyi Chu

Smart Materials and Structures · 18.11.2026

DOI: 10.1088/1361-665x/aec3f0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 18.11.2026. Verfasst von maozheng song und 5 weiteren Autor:innen. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inspired by gecko adhesion, robotic end-effectors have gained increasing attention in aerospace engineering for applications such as spacecraft servicing, orbital debris removal, and payload transportation. However, microwedge adhesive setae in large-area or multi-unit adhesive systems often suffer from reduced performance due to insufficient contact on slightly inclined surfaces and the pitch-back moment generated during tangential actuation. To overcome these limitations, we propose a gecko-inspired end-effector incorporating an overlapping rigid-compliant-rigid (R-C-R) displacement/force transmission chain. The compliant adaptive layer enables effective accommodation of slight surface inclinations, while a micro-displacement rigid actuator applies low-force, low-torque loading to the microwedge adhesive pad with minimal coupling disturbance. Using an ε-constraint strategy and sequential quadratic programming (SQP) based on the analytical model, a balanced compatibility design is achieved. Experiments show that the optimized end-effector attains a 91.5% contact area and an adhesion force of 8.83 N on flat surfaces, adheres to a 320 g object with a 0.13° inclination, and maintains stable adhesion under ±600 mm/s² acceleration and velocities up to 50 mm/s over 120 repeated dynamic tests. In addition, dynamic capture validation on an air-bearing platform demonstrates the preliminary feasibility of the end-effector for low-friction free-floating target capture. This work provides a design and optimization strategy for gecko-inspired end-effectors and offers preliminary experimental support for their potential aerospace-oriented applications.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

song, M., Cui, J., zhang, Y., 陈, 旭., xiaodong, Z., & Chu, Z. (2026). Design and optimization of gecko-inspired robotic end-effector driven by a rigid-compliant-rigid transmission chain. Smart Materials and Structures. https://doi.org/10.1088/1361-665x/aec3f0

Vancouver

song M, Cui J, zhang Y, 陈 旭, xiaodong Z, Chu Z. Design and optimization of gecko-inspired robotic end-effector driven by a rigid-compliant-rigid transmission chain. Smart Materials and Structures. 2026. doi:10.1088/1361-665x/aec3f0

BibTeX
@article{song2026,
  author = {song, maozheng and Cui, Jing and zhang, Yihao and 陈, 旭 and xiaodong, zhang and Chu, Zhongyi},
  title = {Design and optimization of gecko-inspired robotic end-effector driven by a rigid-compliant-rigid transmission chain},
  journal = {Smart Materials and Structures},
  year = {2026},
  doi = {10.1088/1361-665x/aec3f0}
}
Kostenlos starten →