EUVIMEDEUVIMED entdecken
Crossref

From material to structure: Quantifying the structure effect in magnetoelectric devices by coupling energy-based constitutive laws to finite elements

Hakeim Talleb

Smart Materials and Structures · 11.11.2026

DOI: 10.1088/1361-665x/aec0e8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 11.11.2026. Verfasst von Hakeim Talleb.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Modelling the anhysteretic magneto-elastic behaviour of a giant magnetostrictive material such as Terfenol-D is not straightforward. The discrete energy-averaged model (DEAM), developed and validated for Galfenol, is cubic and routes the large \lambda_{111} constant into shear, so it predicts a near-zero longitudinal piezomagnetic coefficient for Terfenol-D unless it is re-parameterized ad hoc. An analytical energy-averaged model was proposed in 2022 for finite-element use, but its closed-form solution, built on the Dawson function, becomes singular under compressive stress and needs an empirically fitted validity limit. We show that this singularity is not physical: the partition integral is always finite, and a direct one-dimensional quadrature evaluates it, together with the magnetization, the magnetostriction and the full piezomagnetic tensor, including the shear coefficient d_{15}, exactly and in closed form for any field and stress. The same three-parameter law reproduces the longitudinal Galfenol response of the DEAM, while the shear channel of cubic materials keeps the DEAM necessary: the two laws are complementary by channel. The law is validated against measured Terfenol-D curves, where adding an anisotropy term to the energy balance improves the agreement. Embedding it at every integration point of an axisymmetric multiphysics finite-element model then quantifies the structure effect, the gap between the material curve and the device response, governed by two dimensionless numbers, \chi_0\ N_d for the magnetic effect and \frac{k}{E/h} for the mechanical one, and illustrated on an annular Terfenol-D/PZT current sensor. A frequency study closes the loop: eddy-current screening multiplies the dynamic coefficient by a complex factor, the associated Joule losses heat the material, and the Bloch-law temperature dependence of the constitutive parameters derates the coefficients; thin laminated layers push this limit to the megahertz range.

Zitieren

APA

Talleb, H. (2026). From material to structure: Quantifying the structure effect in magnetoelectric devices by coupling energy-based constitutive laws to finite elements. Smart Materials and Structures. https://doi.org/10.1088/1361-665x/aec0e8

Vancouver

Talleb H. From material to structure: Quantifying the structure effect in magnetoelectric devices by coupling energy-based constitutive laws to finite elements. Smart Materials and Structures. 2026. doi:10.1088/1361-665x/aec0e8

BibTeX
@article{Talleb2026,
  author = {Talleb, Hakeim},
  title = {From material to structure: Quantifying the structure effect in magnetoelectric devices by coupling energy-based constitutive laws to finite elements},
  journal = {Smart Materials and Structures},
  year = {2026},
  doi = {10.1088/1361-665x/aec0e8}
}
Kostenlos starten →