3D-printed heel-conformal wearable piezo–triboelectric hybrid sensor for self-powered discrimination of human locomotion
Smart Materials and Structures · 01.11.2026 · 35 (11) · 115023
DOI: 10.1088/1361-665x/aebce1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 11.11.2026. Verfasst von Young Won Kim und 3 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Gefördert von: MAFRA Kore, Korea Institute of Industrial Technology.
Abstract (Originalsprache)
Wearable self-powered sensors that respond to plantar pressure are attractive for gait and activity monitoring, yet most hybrid piezoelectric–triboelectric devices are built on flat substrates and interpret each channel in isolation, which limits both their conformity to the curved heel and the kinematic information that can be extracted from a single loading event. Here we report a 3D-printed heel-conformal piezo–triboelectric hybrid sensor (PTHS) in which a piezoelectric sensor (PS) and a triboelectric sensor (TS) are vertically stacked on a substrate replicated from a 3D-scanned human heel, so that a compliant spacer imposes a mechanical threshold and the two transducers respond sequentially, TS first and PS second, along one vertical load path. The PS comprises five electrospun PVDF-TrFE nanofiber mats reinforced by 750 μ m conductive solder bead arrays and consolidated by vacuum hot-press packaging; the TS pairs a PVDF-TrFE nanofiber negative layer backed by a PDMS charge-trapping layer with an Al positive layer. Under controlled foot tapping at approximately 440 kPa the PS and TS delivered peak-to-peak open-circuit voltages of about 12 V and 65 V, respectively, and both channels retained their initial amplitude over about 930 loading cycles. During walking, jumping and weight shifting performed by a single subject, the two channels produced distinct signatures: the PS peak rose approximately 3.6-fold from walking (13 ± 6 V) to jumping (48 ± 28 V), whereas weight shifting activated only the PS while the TS remained silent because baseline contact was maintained. Feature-based classification of 325 loading cycles with support-vector-machine, random-forest and k-nearest-neighbor models discriminated the three activities with 93.3%–93.9% cross-validated and 86.2%–88.3% leave-one-recording-out accuracy, with the amplitude relationship between the two channels the most informative feature. Within the limits of this single-subject demonstration, the heel-conformal PTHS is established as a platform for self-powered locomotion sensing and as a design route for multimodal wearable sensors that exploit the complementary piezoelectric and triboelectric responses within one conformal device.
Förderung
- MAFRA Kore
- Korea Institute of Industrial Technology
Zitieren
APA
Kim, Y. W., Lee, H. B., Yoon, J., & Park, S. (2026). 3D-printed heel-conformal wearable piezo–triboelectric hybrid sensor for self-powered discrimination of human locomotion. Smart Materials and Structures, 35(11), 115023. https://doi.org/10.1088/1361-665x/aebce1
Vancouver
Kim YW, Lee HB, Yoon J, Park S. 3D-printed heel-conformal wearable piezo–triboelectric hybrid sensor for self-powered discrimination of human locomotion. Smart Materials and Structures. 2026;35(11):115023. doi:10.1088/1361-665x/aebce1
BibTeX
@article{Kim2026,
author = {Kim, Young Won and Lee, Han Bit and Yoon, Jonghun and Park, Suk-Hee},
title = {3D-printed heel-conformal wearable piezo–triboelectric hybrid sensor for self-powered discrimination of human locomotion},
journal = {Smart Materials and Structures},
year = {2026},
volume = {35},
number = {11},
pages = {115023},
doi = {10.1088/1361-665x/aebce1}
}
EUVIMED