A dual-coil energy-coupled actuator with magnetic-flux-path reconstruction and excitation optimization for high-speed on/off valves
Smart Materials and Structures · 01.11.2026 · 35 (11) · 115002
DOI: 10.1088/1361-665x/aeb77a ↗Kurz gefasst
Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 02.11.2026. Verfasst von Jianghao Ren und 3 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Agricultural University.
Abstract (Originalsprache)
An energy-coupled actuator (ECA) based on the shear mode of magnetorheological fluid (MRF) is developed for high-speed on/off valve actuation. In the conventional single-coil ECA, the central coupling region is magnetized later than the regions adjacent to the winding, while part of the outer magnetic field contributes little to useful shear force. To address these limitations, an outer iron-ring branch and a secondary coil are introduced to reconstruct the magnetic-flux path while preserving the total coil turns and magnetic coupling area. A transient electromagnetic–mechanical model with a quasi-static MRF stress–field relation describes the excitation circuit, magnetic field, MRF shear force, and translational motion. Within the investigated geometry and excitation range, finite-element sweeps select a secondary-coil turn fraction of 0.3. A symmetric dual-valve arrangement is also used to align the actuation force with spool motion. Without hydraulic loading, 48 V step excitation reduces the measured start-up delay from approximately 3–2 ms and increases the displacement at 7 ms from 1.7 mm to 4.0 mm relative to the single-coil structure. At 4 mm displacement, a 36–28 V peak-and-hold sequence reduces the estimated electrical input from 1.93 J to 1.42 J while maintaining a response close to that under 36 V step excitation. Hydraulic tests at high- and low-pressure port levels of 82 and 10 bar and a pump speed of 300 rpm further demonstrate commanded valve operation and pumping. The unloaded comparison therefore demonstrates faster dual-coil actuation, while the hydraulic test verifies operation at the tested loaded operating point.
Förderung
- National Natural Science Foundation of China
- China Agricultural University
Zitieren
APA
Ren, J., Dai, J., Xie, G., & Xiong, S. (2026). A dual-coil energy-coupled actuator with magnetic-flux-path reconstruction and excitation optimization for high-speed on/off valves. Smart Materials and Structures, 35(11), 115002. https://doi.org/10.1088/1361-665x/aeb77a
Vancouver
Ren J, Dai J, Xie G, Xiong S. A dual-coil energy-coupled actuator with magnetic-flux-path reconstruction and excitation optimization for high-speed on/off valves. Smart Materials and Structures. 2026;35(11):115002. doi:10.1088/1361-665x/aeb77a
BibTeX
@article{Ren2026,
author = {Ren, Jianghao and Dai, Jin and Xie, Guohuan and Xiong, Shaoping},
title = {A dual-coil energy-coupled actuator with magnetic-flux-path reconstruction and excitation optimization for high-speed on/off valves},
journal = {Smart Materials and Structures},
year = {2026},
volume = {35},
number = {11},
pages = {115002},
doi = {10.1088/1361-665x/aeb77a}
}
EUVIMED