A bistable rotary actuator based on shape memory alloy
Smart Materials and Structures · 01.08.2026 · 35 (8) · 085029
DOI: 10.1088/1361-665x/ae91aa ↗Kurz gefasst
Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 17.08.2026. Verfasst von Xiaozheng Li und 5 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province.
Abstract (Originalsprache)
Based on the high power density of shape memory alloys (SMAs) and the zero–power latching capability of bistable mechanisms, this paper proposes a bistable rotary actuator driven by antagonistic SMA wire windings to fulfill rotational functional requirements under specific environmental constraints. An analytical relationship between the geometric parameters of the bistable structure and the output rotation angle is first established, and the initial preset lengths of the antagonistic SMA wires as well as the required winding turns for given dimensions are derived. Twelve actuator prototypes with specific parameter combinations are then fabricated, and the comprehensive torque required for the SMA wires to overcome the bistable snap-through force and the winding friction resistance is experimentally calibrated. Finally, functional validation is conducted on a selected parameter set. The results demonstrate that the proposed design methodology of rotary actuator is effective within a specific parameter range. The rotary actuator achieves a rotation of approximately 40° with zero–torque holding in the stable states under the selected parameters. Moreover, the actuator exhibits promising application potential in the mechanical detachment of electrostatic adhesion pads, where the torsional release mechanism can effectively alleviate detachment difficulties caused by electrostatic accumulation.
Förderung
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Li, X., Wang, G., Hu, Q., Tian, X., Wang, Y., & Gao, X. (2026). A bistable rotary actuator based on shape memory alloy. Smart Materials and Structures, 35(8), 085029. https://doi.org/10.1088/1361-665x/ae91aa
Vancouver
Li X, Wang G, Hu Q, Tian X, Wang Y, Gao X. A bistable rotary actuator based on shape memory alloy. Smart Materials and Structures. 2026;35(8):085029. doi:10.1088/1361-665x/ae91aa
BibTeX
@article{Li2026,
author = {Li, Xiaozheng and Wang, Geng and Hu, Qingzhong and Tian, Xiangyu and Wang, Yan and Gao, Xing},
title = {A bistable rotary actuator based on shape memory alloy},
journal = {Smart Materials and Structures},
year = {2026},
volume = {35},
number = {8},
pages = {085029},
doi = {10.1088/1361-665x/ae91aa}
}
EUVIMED