4D printing of reusable mechanical metamaterial energy absorber, experimental and numerical investigation
Smart Materials and Structures · 01.06.2025 · 34 (6) · 065006
DOI: 10.1088/1361-665x/addead ↗Kurz gefasst
Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 06.06.2025. Verfasst von Ali Fallah und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministero dell’Università e della Ricerca, Ulusal Metroloji Enstitüsü, Türkiye Bilimsel ve Teknolojik Araştirma Kurumu.
Abstract (Originalsprache)
This study investigates the compression behavior, energy absorption, shape memory properties, and reusability of 4D-printed smart mechanical metamaterials. Four structural configurations, i.e. honeycomb, re-entrant, and two modified re-entrant designs were developed to assess microstructure effects. Samples were fabricated using Polylactic Acid (PLA), a widely used shape memory polymer (SMP) in 4D printing, and polyethylene terephthalate glycol (PETG), an emerging SMP with demonstrated shape memory performance in recent studies. Cold-programming-induced shape recovery was evaluated at room temperature, simulating real-world conditions. Finite element simulations of compression and shape memory cycles matched experimental results well. Auxetic samples with negative Poisson’s ratios showed superior energy absorption. However, only PETG demonstrated sufficient reusability, while PLA proved unsuitable for reusable designs. The PETG-3 modified re-entrant structure exhibited the best performance, with high energy absorption, delayed densification onset, and shape recovery and reusability factors of 0.95 and 0.96, respectively. Findings highlight the importance of considering both shape recovery and reusability when designing smart structures to address industrial challenges.
Förderung
- Ministero dell’Università e della Ricerca
- Ulusal Metroloji Enstitüsü, Türkiye Bilimsel ve Teknolojik Araştirma Kurumu
Zitieren
APA
Fallah, A., Saleem, Q., Scalet, G., & Koc, B. (2025). 4D printing of reusable mechanical metamaterial energy absorber, experimental and numerical investigation. Smart Materials and Structures, 34(6), 065006. https://doi.org/10.1088/1361-665x/addead
Vancouver
Fallah A, Saleem Q, Scalet G, Koc B. 4D printing of reusable mechanical metamaterial energy absorber, experimental and numerical investigation. Smart Materials and Structures. 2025;34(6):065006. doi:10.1088/1361-665x/addead
BibTeX
@article{Fallah2025,
author = {Fallah, Ali and Saleem, Qandeel and Scalet, Giulia and Koc, Bahattin},
title = {4D printing of reusable mechanical metamaterial energy absorber, experimental and numerical investigation},
journal = {Smart Materials and Structures},
year = {2025},
volume = {34},
number = {6},
pages = {065006},
doi = {10.1088/1361-665x/addead}
}
EUVIMED