EUVIMEDEUVIMED entdecken
Crossref

Designing an electromechanical metamaterial beam with arbitrary decoupled defect modes for multi-band wave localization

Yupei Jian, Lihua Tang, Deqing Huang, Hesheng Han, Weiqun Liu, Guobiao Hu

Smart Materials and Structures · 01.03.2025 · 34 (3) · 035015

DOI: 10.1088/1361-665x/adb35e ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Materials and Structures, online erschienen am 17.02.2025. Verfasst von Yupei Jian und 5 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 64 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Natural Science Foundation of China, Guangzhou Municipal Science and Technology Bureau.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Defective phononic crystals (PnCs) and metamaterials have gained considerable attention for applications in waveguiding, energy harvesting, and sensing. Despite the increasing interest, traditional defective PnCs/metamaterials are typically restricted to single or dual defect bands, with narrow tunable ranges constrained by the bandgap width. Instead of structural defects, this study introduces an approach to achieve arbitrary decoupled defect modes in defective piezoelectric metamaterial via electrically controlled defects, enabling flexible wave localization across multiple frequency bands. Specifically, we design multiple bandgaps in piezoelectric metamaterials by paralleling unit cells with higher-order resonant circuits that include ‘current-flowing’ branches and consequently propose a multi-bandgap decoupling tuning method. Based on this, a conjecture that adjusting the inductance of a single cell can produce defect bands in all bandgaps is proposed. To accurately predict defect bands, harmonic responses, and wave modes, the spectral element method, incorporating the Timoshenko beam unit, is used to describe the dynamic properties of the metamaterial, which are further validated by finite element analysis. The influence of electrical open-circuit and short-circuit conditions on defect-mode frequencies, alongside the frequency-dependent properties of the energy localization effect are investigated. Results confirm that an arbitrary number of defect bands at specific frequencies can be achieved by tuning the defective cell’s electrical impedance, with each band’s tunability and corresponding energy-localized behavior functioning independently. The proposed approach uniquely enables multi-band wave localization with a single-point defect, offering a significant advantage over conventional methods requiring multiple structural defects, and opening new avenues for programmable wave localization in complex vibration scenarios.

Förderung

  • China Postdoctoral Science Foundation
  • National Natural Science Foundation of China
  • Guangzhou Municipal Science and Technology Bureau
  • Shenzhen Science and Technology Program
  • Sichuan Science and Technology Program
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Jian, Y., Tang, L., Huang, D., Han, H., Liu, W., & Hu, G. (2025). Designing an electromechanical metamaterial beam with arbitrary decoupled defect modes for multi-band wave localization. Smart Materials and Structures, 34(3), 035015. https://doi.org/10.1088/1361-665x/adb35e

Vancouver

Jian Y, Tang L, Huang D, Han H, Liu W, Hu G. Designing an electromechanical metamaterial beam with arbitrary decoupled defect modes for multi-band wave localization. Smart Materials and Structures. 2025;34(3):035015. doi:10.1088/1361-665x/adb35e

BibTeX
@article{Jian2025,
  author = {Jian, Yupei and Tang, Lihua and Huang, Deqing and Han, Hesheng and Liu, Weiqun and Hu, Guobiao},
  title = {Designing an electromechanical metamaterial beam with arbitrary decoupled defect modes for multi-band wave localization},
  journal = {Smart Materials and Structures},
  year = {2025},
  volume = {34},
  number = {3},
  pages = {035015},
  doi = {10.1088/1361-665x/adb35e}
}
Kostenlos starten →