EUVIMEDEUVIMED entdecken
Crossref

TCAD modeling of proton irradiated thick (300 μ m) low gain avalanche detector

Rajiv Gupta, Sunidhi Saxena, Chakresh Jain, Kalpna Tiwari, Namrata Agrawal, Ashutosh Bhardwaj, Kirti Ranjan, Ajay Kumar

Semiconductor Science and Technology · 01.08.2026 · 41 (8) · 085003

DOI: 10.1088/1361-6641/ae8ea7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Semiconductor Science and Technology, online erschienen am 04.08.2026. Verfasst von Rajiv Gupta und 7 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: Institute of Eminence (IoE), BHU, Department of Science and Technology, UGC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We present comprehensive technology computer-aided design modeling results for a proton-irradiated, 300 μ m thick low gain avalanche detector (LGAD) with a boron implant dose of 1.6 × 10 13 cm − 2 . We first assess the geometrical and doping parameters of the simulated LGAD through comparison of the electrical and transient current technique characteristics with experimental measurements. Subsequently, we model the effects of proton irradiation on the simulated device. Unlike traditional detectors (PIN and strip detectors), LGADs contain an additional gain layer that facilitates intrinsic charge multiplication but undergoes acceptor removal under irradiation, necessitating the incorporation of these effects in radiation-damage modeling. We employ the Delhi University’s Proton Damage Model (PDM), originally developed for traditional sensors, as a baseline to incorporate radiation-induced trap defects. We then extend the PDM by implementing the acceptor removal mechanism (ARM) to account for the acceptor removal in the gain layer. The simulation results, incorporating the combined PDM and ARM framework, still underestimate the experimental gain, indicating that the model requires further advancements to capture the real device behavior. To understand this discrepancy, we investigate the role of impact ionization in charge multiplication. While the default Selberherr impact ionization model effectively estimated the gain for a non-irradiated LGAD, reproducing the gain of the irradiated LGAD required a fluence-dependent parameterization. This parameterization led to reasonable agreement between the simulated gain and the corresponding gain measurements under red and IR laser illumination. Further, we examine the electrical characteristics of the irradiated device using both the default and the optimized Selberherr impact ionization models to assess the impact of the parameterization. Overall, this work provides comprehensive insights into proton-induced damage in LGADs and highlights the need for refined modeling approaches.

Förderung

  • Institute of Eminence (IoE), BHU
  • Department of Science and Technology
  • UGC
  • Banaras Hindu University
  • University of Delhi

Zitieren

APA

Gupta, R., Saxena, S., Jain, C., Tiwari, K., Agrawal, N., Bhardwaj, A., Ranjan, K., & Kumar, A. (2026). TCAD modeling of proton irradiated thick (300 μ m) low gain avalanche detector. Semiconductor Science and Technology, 41(8), 085003. https://doi.org/10.1088/1361-6641/ae8ea7

Vancouver

Gupta R, Saxena S, Jain C, Tiwari K, Agrawal N, Bhardwaj A, et al. TCAD modeling of proton irradiated thick (300 μ m) low gain avalanche detector. Semiconductor Science and Technology. 2026;41(8):085003. doi:10.1088/1361-6641/ae8ea7

BibTeX
@article{Gupta2026,
  author = {Gupta, Rajiv and Saxena, Sunidhi and Jain, Chakresh and Tiwari, Kalpna and Agrawal, Namrata and Bhardwaj, Ashutosh and Ranjan, Kirti and Kumar, Ajay},
  title = {TCAD modeling of proton irradiated thick (300 μ m) low gain avalanche detector},
  journal = {Semiconductor Science and Technology},
  year = {2026},
  volume = {41},
  number = {8},
  pages = {085003},
  doi = {10.1088/1361-6641/ae8ea7}
}
Kostenlos starten →