Deposition rate and energy to substrate in chopped and standard HiPIMS: identifying optimal pulse parameters
Plasma Sources Science and Technology · 01.11.2026 · 35 (11) · 115013
DOI: 10.1088/1361-6595/aebcb1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Plasma Sources Science and Technology, online erschienen am 11.11.2026. Verfasst von M Farahani und 2 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerstvo Školství, Mládeže a Tělovýchovy.
Abstract (Originalsprache)
High-power impulse magnetron sputtering (HiPIMS) delivers higher ionisation of the target material at the expense of lower deposition rates than conventional magnetron sputtering. A fine optimisation of the deposition conditions is crucial for specific applications. Chopped or multi-pulse HiPIMS (segmenting pulses into shorter micropulses) has been proposed to enhance the degree of ionisation of the film-forming flux fraction while maintaining the deposition rate. This study investigates how micropulse length and the delay time between segments influence energy flux, deposition rate, and the ionised flux fraction (IFF) in both chopped and standard HiPIMS (s-HiPIMS). These quantities are evaluated by passive thermal probe, biasable QCM and mass spectrometer measurements at the substrate position. Deposition-averaged and pulse-averaged power is kept constant for all conditions to facilitate meaningful comparison. Results indicate that chopping the HiPIMS pulse consistently leads to higher energy flux and total deposition rate compared to s-HiPIMS at the same total pulse length, primarily due to increased ion flux. In chopped HiPIMS, increasing the delay time between micropulses beyond 30 μ s simultaneously improved the deposition rate and the IFF. In comparison, s-HiPIMS, operated at higher frequencies and shorter pulse lengths, demonstrated similar performance with even higher total energy fluxes, but this can be attributed to a higher fraction of process-gas ions in the flux to the substrate, rather than to an increased IFF of the film-forming species.
Förderung
- Ministerstvo Školství, Mládeže a Tělovýchovy
Zitieren
APA
Farahani, M., Čapek, J., & Kozák, T. (2026). Deposition rate and energy to substrate in chopped and standard HiPIMS: identifying optimal pulse parameters. Plasma Sources Science and Technology, 35(11), 115013. https://doi.org/10.1088/1361-6595/aebcb1
Vancouver
Farahani M, Čapek J, Kozák T. Deposition rate and energy to substrate in chopped and standard HiPIMS: identifying optimal pulse parameters. Plasma Sources Science and Technology. 2026;35(11):115013. doi:10.1088/1361-6595/aebcb1
BibTeX
@article{Farahani2026,
author = {Farahani, M and Čapek, J and Kozák, T},
title = {Deposition rate and energy to substrate in chopped and standard HiPIMS: identifying optimal pulse parameters},
journal = {Plasma Sources Science and Technology},
year = {2026},
volume = {35},
number = {11},
pages = {115013},
doi = {10.1088/1361-6595/aebcb1}
}
EUVIMED