Prediction of the tungsten behavior in a high power high current JT-60SA H-mode plasma
Plasma Physics and Controlled Fusion · 18.11.2026
DOI: 10.1088/1361-6587/aec3d7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Plasma Physics and Controlled Fusion, online erschienen am 18.11.2026. Verfasst von Clemente Angioni und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In order to prepare for possible future operation of JT-60SA with tungsten plasma facing components, a H-mode scenario of JT-60SA at high power and high current is considered as reference in order to investigate the tungsten transport behaviour and assess the amount of electron cyclotron resonance heating (ECRH) which is predicted to be required in order to avoid central accumulation of tungsten. The modelling is performed with the ASTRA transport code in combination with the TGLF-SAT2 quasi-linear turbulent transport model and with neoclassical transport of impurities computed by the drift-kinetic solver NEO and the FACIT model. The impact of argon as additional seeded impurity is also considered, not only in the core behavior but also on the possibility of achieving tungsten screening in the pedestal region. The main result is that these H-mode conditions in JT-60SA achieve a so far largely unexplored domain of parameters, in which a reactor-like very low collisionality is combined with high rotation levels. In contrast to the usual domain of operation of present medium size tokamaks, where tungsten neoclassical transport is in the plateau to Pfirsch-Schlüter regime, in the predicted JT-60SA conditions toroidal rotation has a beneficial effect in increasing the strength of the temperature screening, enabling operation without any strong central tungsten accumulation and, in the most unfavorable conditions of high tungsten concentration and low rotation, requiring only 2 MW of central ECRH power to avoid locally negative electron heat fluxes in the center. Within the limited predictive capabilities of the present modelling approach for pedestal parameters, a sufficiently large and realistic domain of parameters in terms of argon concentration and plasma rotation, as well as of relative density and temperature logarithmic gradients, can also be expected to lead to the dominance of tungsten temperature screening in the JT-60SA pedestal.
Zitieren
APA
Angioni, C., Fajardo, D., Bergmann, M. G., Garzotti, L., Lo-Cascio, G., Cortemiglia, T. L. D., & Tardini, G. (2026). Prediction of the tungsten behavior in a high power high current JT-60SA H-mode plasma. Plasma Physics and Controlled Fusion. https://doi.org/10.1088/1361-6587/aec3d7
Vancouver
Angioni C, Fajardo D, Bergmann MG, Garzotti L, Lo-Cascio G, Cortemiglia TLD, et al. Prediction of the tungsten behavior in a high power high current JT-60SA H-mode plasma. Plasma Physics and Controlled Fusion. 2026. doi:10.1088/1361-6587/aec3d7
BibTeX
@article{Angioni2026,
author = {Angioni, Clemente and Fajardo, Daniel and Bergmann, Michael George and Garzotti, Luca and Lo-Cascio, Guillaume and Cortemiglia, Teobaldo Luda di and Tardini, Giovanni},
title = {Prediction of the tungsten behavior in a high power high current JT-60SA H-mode plasma},
journal = {Plasma Physics and Controlled Fusion},
year = {2026},
doi = {10.1088/1361-6587/aec3d7}
}
EUVIMED